(technically, this is a 2nd post. Original post below) Am I the only one that can't see all my client bridges when hitting the search button in simpleMonitor? I'll get maybe 20 that show up on the list (same with aspsearchmgr.exe), but the arp table will show 40 or more .even though there's 80+ airBridges out there.
If I ping them first, they'll show up on the arp table. Or if I'm running simpleNMS, they'll show up in the arp table. Tim Foster www.AledoBroadBand.com Aledo's only high-speed ISP > > > > If PC is on the same subnet as the device, after ping, check the arp -a, > > make sure the Mac & IP correspond to the device. Also use the attached > > Apsearchmgr (run in DOS) to see if the info return is correct. It is for > > searching device running on the same subnet in your network. Pls show me > > the info captured by the Apsearchmgr. > > > > Alex > > sB Tech Support > > > > > > Just out of curiosity, what does it mean if: > -simpleMonitor Search window tunrs up about 15 airBridges, > -aspsearchmgr.exe turns up 24 airbridges > -arp-a (right after running aspsearchmgr) turns up 37 > -but I've got over 80 out there? (about 5 of them run the old firmware > that doesn't allow remote admin) > > Usually, I have to ping them before they show up in the arp table. Or if > I'm running simpleNMS (where I have them all added manually), they all > show up in the arp table. (The Search feature in simpleNMS doesn't work > for me.) They also show up in the arp table of the linux box that runs > mrtg since I'm tracking RSSI & linkQ for all my radios right now. > > Ideas? The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
