Del-
Try going into "sitesurvey" in "Airbridge simple monitor" and entering
in the "essid" and "bssid" into the fields manually for each unit and hit
the "set values" button toward the bottom of the window and then try to
reassociate your units.
Later,
Andrew
P.S. I hope this answers your question
----- Original Message -----
From: "Del Thompson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, July 28, 2003 1:19 PM
Subject: [smartBridges] FW: DHCP through AirBridge Outdoor
>
>
> > -----Original Message-----
> > From: Del Thompson
> > Sent: Monday, July 28, 2003 1:14 PM
> > To: '[EMAIL PROTECTED]'
> > Subject: DHCP through AirBridge Outdoor
> >
> > Hello all,
> > I'm relatively new to this list so don't know if this problem has been
> > discussed before.
> > I have a network with about 13 of the AirBridge Totals in the field and
we
> > have them set to use DHCP for the radio and the PC's connected to them.
> > (most have the latest firmware 0.01.07). The ABT's are working fine.
> >
> > I ran into a problem late last week with the AirBridge outdoor of which
I
> > have three. They have the latest firmware 0.01.07, and are set up
exactly
> > the same as the ABT's. The AirBridge outdoors will not get a DHCP
address
> > and neither will the Clients connected to them.
> > We have double checked our DHCP server and everything looks correct,
other
> > radios on the same AP get their respective DHCP address.
> >
> > It acts like the AirBridge Outdoor will not accept a DHCP address or
pass
> > DHCP requests from the clients. I double checked the primary port for
> > DHCP on the ABO is set for Wireless which is how we have all of the
other
> > working radios setup.
> >
> > Any ideas?
> > Thank you,
> > Del
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org
>
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
