Some Excellent feedback but has anyone actually tried this for real or something similar -
If not how do people service hundreds of clients in one location? Rob -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lars Gaarden Sent: 04 August 2003 21:18 To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Max clients per APPO ? SmartBridge recommended for covering a small community ? Tom Haynes wrote: > You can use only 3 channels in the same coverage area. You can put 12 AP on > the same tower if you plan it right. North - V-POL 60* sectors ch 1,6,11 ; > East - H-POL 60* sectors ch 1,6,11 ; South - V-POL 60* sectors ch 1,6,11 ; > West - H-POL 60* sectors ch 1,6,11 > > With some good engineering you can put 36 AP's like this: > Each direction have an array like this > HI H1 H6 H11 > MID V11 V1 V6 > LOW H6 H11 H1 > Adjust each sectors gain, VBW, FB, etc to match the density Are any people really doing this? That would require client antennas with very narrow vertical and AP antennas with very good polarity and f/b ratio, no? -- LarsG The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
