18V DC 2AMP would be my recommendation. I had a problem with the Raylink APs because their power supplies were rated right EXACTLY at what the radio consumed at peak usage, and over a relatively short period of time the heat got to the power supply and it fried itself.
With a 2AMP supply you give yourself plenty of juice, and the power supply isn't being pushed to it's absolute max all the time, so it will last longer. Kevin Summers KISTech Internet Services Inc. www.kistech.com <http://www.kistech.com/> > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Roger Howard > Sent: Tuesday, August 05, 2003 11:08 AM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Ethernet port problem > > > no, you need a minimum of 1000mA > > > ----- Original Message ----- > From: "Rob Cleminson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, August 05, 2003 1:08 PM > Subject: RE: [smartBridges] Ethernet port problem > > > > I have just found a 16V DC 200mA Adapter at home - will this do the job? > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Summers > > Sent: 05 August 2003 18:30 > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] Ethernet port problem > > > > > > Yes, for powering a unit on that length of cable you'll definitely > > need the 18V power supply. > > > > Kevin Summers > > KISTech Internet Services Inc. > > www.kistech.com <http://www.kistech.com/> > > > > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] Behalf Of Rob Cleminson > > > Sent: Tuesday, August 05, 2003 10:28 AM > > > To: [EMAIL PROTECTED] > > > Subject: RE: [smartBridges] Ethernet port problem > > > > > > > > > I checked all cables - checked all crimped ends - everything worked on > > > the ground - I just installed the unit up my tower with 100Metre of > > > Cat5, plugged in the powershot and nothing - I'll try the 18V supply. > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of Tom Haynes > > > Sent: 05 August 2003 18:15 > > > To: [EMAIL PROTECTED] > > > Subject: RE: [smartBridges] Ethernet port problem > > > > > > No, it sounds like a loose connection at the computer, powerShot or > > air > > > bridge. Try using a different powerShot and cables. > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] > > > On Behalf Of Matt Grommes (SpinnNet System Admin) > > > Sent: Tuesday, August 05, 2003 11:56 AM > > > To: [EMAIL PROTECTED] > > > Subject: [smartBridges] Ethernet port problem > > > > > > > > > One of my techs was experiencing a weird problem with an AirBridge > > > Outdoor the other day. He hooked it up and it came up just fine but > > then > > > > > > when he went back into the SimpleMonitor to change the password it > > > started losing association and wouldn't come back up. When he brought > > up > > > > > > the screen to search for APs and hit Refresh, the Ethernet connection > > > from his laptop to the ABO died (no light on ABO, windows complaining > > > that the connection was lost) and he had to reboot the ABO to get it > > to > > > come back up. We haven't had any problems like the heat issue others > > > experienced so I'm not sure if this is that problem or not. He's going > > > > > to try the new firmware on the unit today but does this sound like > > that > > > issue? > > > > > > > > > -- > > > -- Matt Grommes -- > > > -- System Admin -- > > > -- SpinnNet -- > > > -- 505.938.7746 -- > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > > smartBridges) > > > Archives: http://archives.part-15.org > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > > smartBridges) > > > Archives: http://archives.part-15.org > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > > unsubscribe smartBridges) > > > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
