True but like myself I like to have that port open for emergencies not used by a general unit all the time. And using crossover plugs is kinda bulky so the switch is helpful in some cases.
Chris
-----Original Message-----
From: Mike @ Nitrous [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 08, 2003 11:47 AM
To: [EMAIL PROTECTED]
On a hub or switch you just need to use the uplink port.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jerry Olney
Sent: Friday, August 08, 2003 11:34 AM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Powershots?
At 08:16 AM 08/08/2003 -0700, you wrote:
>Why would you need a crossover with an airBridge. Yes...with the
>airPoints...but not with the airBridges...you can plug them directly
>into a PC without crossover.
>
>Sully
A PC yes, a hub/switch no...
Jerry
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
