|
I'm using one API in a box on a 15 DBi omni as 1/2 of a repeater. The other side is a D-Link DWL-900AP to a 21 DBi Grid pointed at the main APPO AP 3-1/2 mi link. The only thing I don't like is no RSSI and LQ in SimpleNMS on the API clients. Other than that I agree the savings over an APPO is justified.
Earl UpHI.net
-------Original Message-------
Date: Wednesday, August 13, 2003 02:26:08 PM
Subject: Re: [smartBridges] Question about new aP firmware coming out soon.
I'm not sure where you buy them, but at Ecomm, the aP is $179 and the aPPO
is $330. A difference of $151. That difference pays for an Omni, NEMA box,
lightning arrestor and two pigtails.
----- Original Message -----
Sent: Wednesday, August 13, 2003 12:43 PM
Subject: RE: [smartBridges] Question about new aP firmware coming out soon.
> If I recall, the cost of the Airpoint indoor and Outdoor are about the
> same.
>
> Scott
>
> -----Original Message-----
> Sent: Wednesday, August 13, 2003 12:35 PM
> Subject: Re: [smartBridges] Question about new aP firmware coming out
> soon.
>
>
> They will be outdoor in a NEMA box. That is why disabling of
> communication between clients is needed. As I mentioned, the cost of an
> aPPO coupled with the un-availability of them, forces me to go this
> route. If the rated specs on the data sheet for the aP is correct, then
> the climate where I live is within range for operating temps and this
> approach will work just fine. That is my application.
>
>
> ----- Original Message -----
> Sent: Wednesday, August 13, 2003 12:29 PM
> Subject: RE: [smartBridges] Question about new aP firmware coming out
> soon.
>
>
> I mean you no offense, but why would you need to disable communications
> amongst clients at the same location? I assume you are using these as
> indoor access points for businesses/homes. I have never heard of a
> requirement like this. Maybe we are missing something here. What is your
> application?
>
> Jason
>
> > -----Original Message-----
> > Sent: Wednesday, August 13, 2003 3:16 PM
> > Subject: Re: [smartBridges] Question about new aP firmware coming out
> > soon.
> >
> >
> > No, I am talking about the access point. The aP will be used as an
> > access point that's why the ability should be there to disable
> > client-to-client communication. Cost and availability of the aPPO
> > prevent me from using them (I'm small peanuts).
> >
> >
> > ----- Original Message -----
> > Sent: Wednesday, August 13, 2003 12:08 PM
> > Subject: RE: [smartBridges] Question about new aP firmware
> > coming out soon.
> >
> >
> > I think you only need to disable the client to client communications
> > from the access point. This setting does not make a difference on the
> > airPoint on the client end... Is this what you are talking about?
> >
> > Correct me if I am wrong.
> >
> > Jason
> >
> > > -----Original Message-----
> > > Sent: Wednesday, August 13, 2003 3:00 PM
> > > Subject: Re: [smartBridges] Question about new aP firmware
> > coming out
> > > soon.
> > >
> > >
> > > I'm REALLY sorry to hear that. May I ask why something so
> > simple to
> > > implement and widely requested/needed would not be added?
> > Is it more
> > > of an effort to force people to upgrade to the aPP or aPPO for that
> > > kind of capability? Since the aPPOs are so hard to come by, I'm
> > > forced to use the aP to get customers up and running (if I want to
> > > stick with sB anyway). However, I will probably have to rethink my
> > > plan since something so simple to implement will not be
> > added to the
> > > FW.
> > >
> > > Dissappointed,
> > > Scott
> > >
> > >
> > > ----- Original Message -----
> > > Sent: Wednesday, August 13, 2003 11:45 AM
> > > Subject: RE: [smartBridges] Question about new aP firmware coming
> > > out soon.
> > >
> > >
> > > This must be everyone wish but unfortunately it won't have
> > the feature
> > > to disable client to client communication. There is no plan
> > to have it
> > > on airPoint Indoor. The new firmware that is going to
> > release is for
> > > resolving the thermal issue.
> > >
> > > Alex
> > > sB Tech Support
> > >
> > > -----Original Message-----
> > >
> > > Sent: Wednesday, August 13, 2003 10:54 AM
> > > Subject: [smartBridges] Question about new aP firmware coming out
> > > soon.
> > >
> > > Will the new firmware version support disabling client-to-client
> > > communication? That's about the only thing I can think of that I
> > > would really like to see in the new aP firmware.
> > >
> > > The PART-15.ORG smartBridges Discussion List
> > > smartBridges <yournickname> To Remove:
> > smartBridges)
> >
> > The PART-15.ORG smartBridges Discussion List
> > smartBridges <yournickname> To Remove:
> smartBridges)
>
>
>
> The PART-15.ORG smartBridges Discussion List
> the body type unsubscribe smartBridges)
>
> The PART-15.ORG smartBridges Discussion List
> the body type unsubscribe
> smartBridges)
>
>
>
> The PART-15.ORG smartBridges Discussion List
> the body type unsubscribe smartBridges)
>
> The PART-15.ORG smartBridges Discussion List
> the body type unsubscribe
> smartBridges)
>
>
>
> The PART-15.ORG smartBridges Discussion List
> the body type unsubscribe smartBridges)
>
>
> The PART-15.ORG smartBridges Discussion List
smartBridges <yournickname>
smartBridges)
>
>
The PART-15.ORG smartBridges Discussion List
. | 
IncrediMail - Email has finally evolved - Click Here