Unfortunately you can have the same essid and switch out the radio which will give a 
new bssid and it won't ( or at least for us ) associate. We had to reassociate all 
radios associated previously to a radio we replaced, again to get them to link.

---------- Original Message ----------------------------------
From: "David Blood" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Date:  Thu, 7 Aug 2003 21:12:46 -0600

>The channel setting on the airbridge is only used in adhoc mode.  The
>airbridge or most any 802.11b device will scan all channels searching for
>the correct ssid , bssid if set and wep key if set.
>
>The problem with this is that if there are multiple ap with the same ssid
>and wep the client device may not chose to associate with the ap with the
>best signal.
>It has been requested to be able to list multiple ssid and multiple bssid to
>control how the client associates.
>
>We have received no word from smartbridges on whether they would implement
>such a thing.
>
>Even in it's current state it is great to be able to have two radio's on a
>pop and if one fails have the clients immediately switch to the other ap.
>
>Kind Regards,
>
>David
>
>
>David Blood
>Account Executive
>SpeedyQuick Networks, Inc
>Boise, Id
>[EMAIL PROTECTED]
>208-284-5505
>
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of The Wirefree Network
>Sent: Thursday, August 07, 2003 6:45 PM
>To: [EMAIL PROTECTED]
>Subject: RE: [smartBridges] [Maybe Solved] WHOA: Aged Packets going thru
>the roof
>
>
>One more thing that seems odd to me.
>
>NOTE:  I don't have the BSSID hardcoded into the airBridge units first
>of all.
>
>I changed my channel on the aPPo to channel 6 from 1.  I notice in NMS
>that the airBridge units are still set to channel 1...but yet associated
>fine with channel 6.
>
>Does this mean that as long as the unit is in the MAC table, and correct
>WEP...that it will associate with the strongest signal regardless of the
>channel??
>
>Sully
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree
>Network
>Sent: Thursday, August 07, 2003 5:28 PM
>To: [EMAIL PROTECTED]
>Subject: [smartBridges] [Maybe Solved] WHOA: Aged Packets going thru the
>roof
>
>Okay...here is the scoop.
>
>I reburned my settings again with simpleDeploy (using channel 1--as
>usual).  I think it didn't take the last time I tried a few minutes ago.
>
>I was still receiving TONS of aged packets (which has been happening for
>1.5 hours now).
>
>I changed channels to channel 6 and all my clients (19 of 30 so far)
>jumped right over and associated.  ZERO aged packets.
>
>So...now it looks like it is some sort of channel 1 issue?!?!?!
>
>I switched it back to 1 and everyone starts dropping off like flies and
>the AGED PACKETS go through the roof.
>
>I switched back to channel 6...and everyone is fine (19 of 30 so
>far)...ZERO aged packets.
>
>Obviously I am going to leave it on channel 6 for now...but...what the
>HELL?!?!
>
>Anyone have any ideas??
>
>Sully
>
>P.S.  I opened simpleNMS to try to wake the units (seeing how they are
>all manually set) by a ping or snmp query.  It worked on all but 3
>units.
>
>
>
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree
>Network
>Sent: Thursday, August 07, 2003 5:01 PM
>To: [EMAIL PROTECTED]
>Cc: [EMAIL PROTECTED]
>Subject: RE: [smartBridges] WHOA: Aged Packets going thru the roof
>
>Before I do that....I changed the channel from 1 to 6 (I don't use 6).
>I immediately STOPPED receiving "aged packets" and started receiving
>"multicast packets"...still zero "unicast packets".
>
>I still don't have any associated clients though.  I guess all my
>clients are hardcoded into channel 1 and wont swap over to channel 6.
>
>What could be causing this???
>
>Is this what happens when someone JAMS you???  Never saw it from this
>end.  Doesn't it figure that I sent my spectrum analyzer and grasshopper
>down south with an install team!!!!
>
>Maybe I can go sniff it with netstumbler???
>
>What exactly is AGED PACKETS??
>
>Does anyone think this is jamming??
>
>Sully
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] On Behalf Of sB Tech Support
>Sent: Thursday, August 07, 2003 4:44 PM
>To: 'The Wirefree Network'; [EMAIL PROTECTED]
>Subject: RE: [smartBridges] WHOA: Aged Packets going thru the roof
>
>
>Hi Sully,
>
>I am not sure what happened to the wireless statistics and power cycling
>the unit will reset the wireless statistics counter.
>If you think your aPPO is unstable, use the airPointPRO recovery utility
>to recalibrate the memory and then restore the entries or values to the
>unit. Then monitor the clients association with aPPO.
>
>Seeni, SB support
>
>-----Original Message-----
>From: The Wirefree Network [mailto:[EMAIL PROTECTED]
>Sent: Friday, August 08, 2003 7:25 AM
>To: '[EMAIL PROTECTED]'
>Cc: '[EMAIL PROTECTED]'
>Subject: RE: [smartBridges] WHOA: Aged Packets going thru the roof
>
>It now appears to be rebooting itself every few seconds...I sit here
>watching the "aged packets" count up (NO UNICAST PACKETS RECEIVED), then
>it resets all values to zero (and the few clients that were associated,
>lose association).
>
>Looks like my aPPo took a big turd?!!?  Great and no backup!!  I
>actually tried to order one today even...still haven't heard back from
>anyone on if there are any in stock anywhere?!?!?
>
>Any suggestions?!?!
>
>Sully
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree
>Network
>Sent: Thursday, August 07, 2003 3:54 PM
>To: [EMAIL PROTECTED]
>Subject: RE: [smartBridges] WHOA: Aged Packets going thru the roof
>Importance: High
>
>My clients are dropping like flies.  Half of them cant even associate
>now?!?!
>
>I performed a "restore to factory default", then quickly reloaded the
>MAC authentication listing.  However, only about half of my clients are
>reassociated.
>
>I am also receiving a HIGH ack failure rate...not abnormally higher than
>normal...but high nonetheless.  It is the "aged packets" that's killing
>me though.
>
>I am running 1.4j.5 firmware on this OLDER style aPPo (not with
>pigtail).
>
>Any ideas....PLEASE!??!
>
>Sully
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree
>Network
>Sent: Thursday, August 07, 2003 3:49 PM
>To: [EMAIL PROTECTED]
>Subject: [smartBridges] WHOA: Aged Packets going thru the roof
>
>I just logged into my aPPo and clicked on Wireless Statistics and
>noticed that my "aged packets" are going through the roof.
>
>What causes this?!?!
>
>I also noticed that my ping times to ALL clients behind this aPPo is
>running an average of 1895 ms.  Compared to less than 10 ms for all my
>clients behind my other aPPo.
>
>Ethernet statistics show great.
>
>Does this mean that my aPPo is CRASHING?!??!
>
>Sully
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>smartBridges <yournickname>
>To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
>smartBridges)
>Archives: http://archives.part-15.org
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>smartBridges <yournickname>
>To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
>smartBridges)
>Archives: http://archives.part-15.org
>
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>smartBridges <yournickname>
>To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
>smartBridges)
>Archives: http://archives.part-15.org
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>smartBridges <yournickname>
>To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
>smartBridges)
>Archives: http://archives.part-15.org
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>smartBridges <yournickname>
>To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
>smartBridges)
>Archives: http://archives.part-15.org
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>smartBridges <yournickname>
>To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
>smartBridges)
>Archives: http://archives.part-15.org
>
>
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
><yournickname>
>To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
>Archives: http://archives.part-15.org  
>---
>[This E-mail scanned for viruses by Declude Virus By Avolve.net]
>
>
---
[This E-mail scanned for viruses by Declude Virus By Avolve.net]

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to