We are using four APPOs on the same water tower. Running channels 1, 4, 8, and 11. Using 90 degree sector antennas from Pac Wireless. They are aligned this way: channel 1 is on the southeast side of the tower, channel 4 is on the northwest side of the tower, channel 8 is on the northeast side and channel 11 is on the southwest side. This keeps them far enough apart to not interfere with each other. So far, so good. We have only been live for about 3 weeks and haven't gotten customers on all of the access points yet. If we could just keep them all running, that would be great. Channel 11 is down again, I think it has a bad POE. The others seem to be stable since I upgraded the firmware yesterday morning.
Gloria Vester www.vsswireless.net ----- Original Message ----- From: "BROWNLEE,BRAD (HP-FtCollins,ex1)" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, August 18, 2003 3:34 PM Subject: RE: [smartBridges] 4 channels on 802.11b > Has anybody tried the 4 channel config on the same tower? > > Brad Brownlee > Skylink Broadband Internet LLC > > -----Original Message----- > From: Chris Glanzer [mailto:[EMAIL PROTECTED] > Sent: Monday, August 18, 2003 3:36 AM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] 4 channels on 802.11b > > > I posted info on this a few weeks back. I currently employ this channel > method. It seems to work great with no slowdown that I have perceived or > that I can tell by running Qcheck tests. > We have radios around here on 1-4-8-11. This is the only way we could > coordinate channels with other 2.4 users in the area. > > Chris > (Migraine Boy) > > >>> [EMAIL PROTECTED] 08/18/03 2:57 AM >>> > Has anyone implimented the 4 channel theory yet? (1,4,7,11 - 1,4,8,11 - > 1,5,8,11) > Any successes or failures? > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the > body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
