RE: [smartBridges] smartBridges launches PoE Outdoor

[Nish Park]

Title: RE: [smartBridges] smartBridges launches PoE Outdoor

Yes it will be compliant. .     -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree Network Sent: Saturday, August 23, 2003 11:34 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] smartBridges launches PoE Outdoor   Ah…so what you are doing is combining the signal and power within the jack itself, then passing only a CAT5 from the jack to the outdoor POE.  Would that still be in compliance??   Sorry for being stupid on the issue.   Sully   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nish Park Sent: Friday, August 22, 2003 8:16 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] smartBridges launches PoE Outdoor   The external unit can be powered either through the CAT5 cable or the separate RJ11 cable running to it. The supplied wall plate will put the power on the CAT5 going outside and thus feed the power to the outside unit.   Nish     -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree Network Sent: Saturday, August 23, 2003 11:02 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] smartBridges launches PoE Outdoor   Huh…now I am stumped.  I see that the POE unit is outside.  So…if only one CAT5 passes through the wall, how does the outside unit get power??  You cant possibly be using the indoor POE unit to combine the signal and power, then doing it again outside??   Sorry…I am just confused.   Oh…and I don’t use ANY flush mounts (too much work).  I use ONLY the surface mount jacks.  I also don’t fish anyone’s walls.  That would cost me too much in subcontractor fees.  I run all cable outside, with one penetration point where we put a surface mount RJ45 jack, then a short CAT5 to the router/pc.   Sully   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Friday, August 22, 2003 7:42 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] smartBridges launches PoE Outdoor   Yes we are planning for the Flush mount. But I there is still time to change. This can be changed even at a later time based on more user feedback.   Based on the discussion on this forum a few days ago, we have modified the mounting instructions such that only one CAT5 cable needs to go through the wall.   Nish     -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chris Chance Sent: Saturday, August 23, 2003 7:43 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] smartBridges launches PoE Outdoor   I know this flush mount is not a good idea a surface  box I would think would make things easier... did the doc really say flush mount? I hope not :( don't drill 2 holes use a 1/4 inch hole instead of 3/8 or just go one side up to fit both inside. Chris -----Original Message----- From: The Wirefree Network [mailto:[EMAIL PROTECTED]] Sent: Friday, August 22, 2003 11:42 AM To: [EMAIL PROTECTED] Here is my 2 cents on this product that is obviously already in production...too late to make suggestions I guess. I definitely LOVE the compliance factors...the self sensing power adjustment....and the protection!  Much needed improvements!! I don't like the added work I have to do to mount/install this...mounting the box, drilling 2 holes, cutting a hole in there wall for the flush mount plate, etc!  I guess the client could still do a power reset from inside the home...that's okay.  I also don't like the power plug using Rj-11...but there really is not chance of hurting anything there. I personally use a surface mount RJ45 block for all my installs.  I drill one small hole from the outside and mount the jack over the top of the hole.  Sure...flush mounts look nicer...but more work!! Sully -----Original Message----- From: Pallab Chakrabarti [mailto:[EMAIL PROTECTED]] Sent: Friday, August 22, 2003 4:52 AM To: [EMAIL PROTECTED] Subject: smartBridges launches PoE Outdoor Hi smartBridges has introduced PoE Outdoor(tm), a unique concept of dynamic Power over Ethernet for outdoor wireless installations. Please find attached the product brochure and the press release from smartBridges. Please visit www.smartbridges.com/new/products/po.php for details on the PoE Outdoor. Thanks smartBridges Global Marketing The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org