Seeni is it standard TFTP or modified?
Chris
-----Original Message-----
From: Seeni Mohamed [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 25, 2003 2:47 AM
To: [EMAIL PROTECTED]
The simpleDeploy uses the SNMP and TFTP protocols. To manage using
simpleDeploy thru firewall, please open the following port numbers
accordingly.
SNMP port - UDP port 161 and 162 (incoming and outgoing)
TFTP port - 69/tcp
- 69/udp
Seeni, SB support
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Scott
Sent: Monday, August 25, 2003 8:09 AM
To: '[EMAIL PROTECTED]'
Subject: [smartBridges] MikroTik and simpleDeploy
I have a MikroTik router with four interfaces, one interface is my wired
LAN
and another is the wireless LAN. I have an airPoint on the wireless LAN
but
I want to administer it from the wired LAN. How would I set up MT to
let
simpleDeploy 'poke' through and find the aP? I hear that simpleDeploy
uses
port 161 and I'm guessing I need to set up some custom firewall rules to
allow me to do what I want. I've been playing around with it, but with
no
luck. I've tried source-NAT rules, dest-NAT rules, input rules, forward
rules and output rules. I just can't get it to work. So if anyone is
doing
what I am trying, please post some info, it would be much appreciated.
Scott
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
