|
Yes it is an SB unit it is an ABO customers is on
subnet 66.80.xxx.xxx 255.255.255.0 gateway 66.80.xxx.1
Radio is on 10.0.xxx.xxx 255.255.255.0 gateway
0.0.0.0 customer PC can see radio IP in smart monitor but can not get software
to acknowledge that unit is associated?
----- Original Message -----
Sent: Monday, September 01, 2003 2:21
PM
Subject: RE: [smartBridges] Simple
Monitor
Is this airBridge
unit? The IP address can be on different subnet with proper routing or has the
default gateway set to 0.0.0.0 if both PC and device is on the same broadcast
domain. As a rule of thumb, when you encounter problem not able to search in
simpleMonitor, do a ping test to check its connectivity.
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Blazen
Wireless
Sent: Tuesday,
September 02, 2003 4:53 AM
To:
'[EMAIL PROTECTED]'
Subject: [smartBridges] Simple
Monitor
Has anyone else tried this
software yet? I thought I had a customer using it but he tells me it shows the
radio is flatline no association when he is actually associated? He has a
public IP on the PC but a private 10.0.xxx.xxx in the radio? Do you also have
to put in a private IP on the PC as well?
Hopefully not because this will
take up 3 IPS for each pc? one public and private on the PC itself and one
private in the radio?
The funny thing is that the
software does see the IP of the radio but will not read what it is doing which
I assume is because the IP in the PC is not on the same subnet as the
radio?
|
