Actually I partly been sick this week plus swamped with other work (wisp installations. I'm not only a sales guy I run my own WISP/ISP as well and I use what I sell). Been very freaky the last couple of days. I partly lost my balance. Things would be ok or semi ok in the morning but towards the afternoon it would not be ok. You know the feeling you get when you had 2-3 beers or drinks to many and you move forwards best on your hands and knees because you can't manage to stand up and walk at the same time? Well in the afternoon that was how I felt. However this morning I started out "almost" there but thank heaven towards the afternoon the longer it went the more stable I became. Tell you it was freaky.
Best regards, Eje Gustafsson mailto:[EMAIL PROTECTED] The Family Entertainment Network http://www.fament.com Phone : 620-231-7777 Fax : 620-231-4066 - Your Full Time Professionals - eBay UserID : macahan --- searchable smartBridges mailing list archive. http://www.mail-archive.com/smartbridges40part-15.org/ -- GV> I downloaded the CD image and was going to buy the license from Eje, but I GV> couldn't get it to load on my box. Eje is great - spent a lot of time with GV> me on the phone before I downloaded it walking me through the setup. But I GV> haven't been able to get in touch with him since I had the problem - with GV> the new baby and all, I think he may have been away from the office this GV> week. I will keep trying to contact him. I haven't given up on it yet, GV> just got frustrated when the software wouldn't load and I couldn't get in GV> touch with Eje. I checked MikroTik's web site and all I found that might GV> relate to my problem was "CD software not work on some hardware. Replace GV> hardware." I know the motherboard is good. I wasn't trying to use the free GV> demo version, this was the full version which I am going to buy from Eje if GV> I can get it loaded to the point of asking me for the license key. GV> Gloria GV> ----- Original Message ----- GV> From: "Patti Jones" <[EMAIL PROTECTED]> GV> To: <[EMAIL PROTECTED]> GV> Sent: Friday, September 05, 2003 8:51 PM GV> Subject: Re: [smartBridges] Client Authentication >> On the microtik buy from a reseller. I recommend Eje. He is OEM and will >> support the product. I just paid him to setup mine. then I learned from >> reading and seeing what he did. Yes you can download it for free but that >> is what you get. >> >> Patti >> ----- Original Message ----- >> From: "Martin Moreno" <[EMAIL PROTECTED]> >> To: <[EMAIL PROTECTED]> >> Sent: Friday, September 05, 2003 8:33 PM >> Subject: Re: [smartBridges] Client Authentication >> >> >> > Brilan is way easier to deal with althought the mikrotik has more GV> features >> but >> > Brilan will have the same by the end of the year. The brilan demo keep GV> in >> mind >> > only works for 2 hours then you have to reboot the box to get another 2 >> hours I >> > found this out the hard way. It will not work well on those all in one >> machiens >> > like HP, Compaq etc.. I had mine up and running in less then a 1/2 hour >> > Miktorik is a pain in the ass to set up and maintain with the gui as GV> well >> as >> > without the command line interface.. and trying to get support forget ti GV> I >> went >> > 3 months postig to their mail forum trying to figure out how to do GV> bridge >> mode >> > and no one ever answered so I went to Brilan Tony is awesome and GV> sometimes >> > answers at wierd hours when you least expect it which is awesome.. >> > >> > >> > >> > >> > You have to jump throug 3-4 hoops to make a bandwidth queue then mac >> > autehntication is a pain then you haev to do several other thigns to >> throttle >> > one customer where as brilan takes abotu 2 steps and takes me less then GV> 2 >> min >> > to configure a user.. >> > >> > >> > Quoting Gloria Vester <[EMAIL PROTECTED]>: >> > >> > > OK, can you help me figure out why the MikroTik router software I >> downloaded >> > > and burned to CD won't load on the box we built for it? I have burned >> the CD >> > > three times, downloaded the file twice, but it will not load. When I >> try to >> > > boot from the CD, it comes up to the first line, something about GV> loading >> a >> > > kernel, then beeps and throws garbage on the screen that continues >> rolling >> > > until you shut it off. We built a box with an ECS K7S5A mobo, 700 MHz >> AMD >> > > proc, 3 GB HD, and standard AGP video card. Any ideas? I have been GV> on >> the >> > > air for over a month now with no bandwidth control, even though I am >> selling >> > > tiered bandwidth, because I have not been able to get anything GV> working. >> I >> > > tried the BriLan demo and couldn't get it working, now the MikroTik >> won't >> > > even load. >> > > >> > > Thanks for any help, >> > > Gloria >> > > >> > > ----- Original Message ----- >> > > From: Kevin Summers >> > > To: [EMAIL PROTECTED] >> > > Sent: Friday, September 05, 2003 6:35 PM >> > > Subject: RE: [smartBridges] Client Authentication >> > > >> > > >> > > The MikroTik router OS runs on just about any old PC you might >> > > have laying around. Throw two network cards into it and you've got >> > > a router. >> > > Kevin Summers >> > > KISTech Internet Services Inc. >> > > www.kistech.com >> > > >> > > >> > > >> > > -----Original Message----- >> > > From: [EMAIL PROTECTED] >> > > [mailto:[EMAIL PROTECTED] Behalf Of Sevak Avakians >> > > Sent: Friday, September 05, 2003 3:51 PM >> > > To: [EMAIL PROTECTED] >> > > Subject: RE: [smartBridges] Client Authentication >> > > >> > > >> > > Hi Kevin, >> > > >> > > I've taken a look at MicroTik's website and it seems to be GV> software >> that >> > > runs on a desktop. Is this correct or is it a separate piece of >> hardware >> > > similar to a Linksys or Cysco, etc. router? >> > > >> > > Thanks, >> > > Sevak >> > > >> > > On Thu, 2003-09-04 at 19:25, Kevin Summers wrote: >> > > Actually it's just the PPTP and HotSpot clients that get the >> > > DHCP addresses. PPPoE clients just get their assigned IP from >> > > the PPPoE login. >> > > >> > > The MikroTik router actually handles the HotSpot login page. Through >> > > the use of Firewall rules we've set things up to allow a link from >> > > the HotSpot login page to a secure page on our web server so that >> > > people can sign up. >> > > >> > > Kevin Summers >> > > KISTech Internet Services Inc. >> > > www.kistech.com >> > > >> > > >> > > >> > > > -----Original Message----- >> > > > From: [EMAIL PROTECTED] >> > > > [mailto:[EMAIL PROTECTED] Behalf Of Dennis Burgess >> > > > Sent: Thursday, September 04, 2003 4:14 PM >> > > > To: [EMAIL PROTECTED] >> > > > Subject: Re: [smartBridges] Client Authentication >> > > > >> > > > >> > > > Kevin, >> > > > >> > > > Question, >> > > > >> > > > Why do you need to give your clients a DHCP IP ? The PPPOE does GV> that >> > > > already correct? Also, using the hotspot stuff, if a custoemer >> assoicates >> > > > with one of my APs, could i setup a way so that they could only get GV> to >> my >> > > > webserver? or a speical page saying, you can get our signal ?? >> > > > >> > > > Dennis >> > > > >> > > > ----- Original Message ----- >> > > > From: "Kevin Summers" <[EMAIL PROTECTED]> >> > > > To: <[EMAIL PROTECTED]> >> > > > Sent: Wednesday, September 03, 2003 6:23 PM >> > > > Subject: RE: [smartBridges] Client Authentication >> > > > >> > > > >> > > > > >> > > > > We're using the MikroTik Router OS for PPTP, PPPoE, and HotSpot >> > > > > authentication using username and password. No WEP encryption on >> > > > > any of the network. If it's so insecure, why take the performance >> > > > > hit. Can't do WEP when doing HotSpot anyway... >> > > > > >> > > > > Radios and such are on private static IPs, customers get a private >> > > > > DHCP IP until they log in, then they are given either their NATed >> > > > > private DHCP IP, or their public static IP. >> > > > > >> > > > > Kevin Summers >> > > > > KISTech Internet Services Inc. >> > > > > www.kistech.com >> > > > > >> > > > > >> > > > > >> > > > > > -----Original Message----- >> > > > > > From: [EMAIL PROTECTED] >> > > > > > [mailto:[EMAIL PROTECTED] Behalf Of Rudolph >> Worrell >> > > > > > Sent: Wednesday, September 03, 2003 4:08 PM >> > > > > > To: [EMAIL PROTECTED] >> > > > > > Subject: [smartBridges] Client Authentication >> > > > > > >> > > > > > >> > > > > > How do you authenticate your customers? I am simply suing WEP GV> and >> a >> > > > DHCP >> > > > > > server. >> > > > > > >> > > > > > How many IP's do you have in your IP pool? I have 1000 but I am >> > > > > > not sure it >> > > > > > will be enough when I get up to about 250 customers. >> > > > > > >> > > > > > I use a separate IP scheme for the CPE and backhuals and this >> works >> > > > fine. >> > > > > > >> > > > > > Anyone else doing this? >> > > > > > >> > > > > > >> > > > > > >> > > > > > -- >> > > > > > Rudolph Worrell >> > > > > > President >> > > > > > Phone:(540)664-3950 >> > > > > > Fax:(270)458-6431 >> > > > > > www.wave2net.com >> > > > > > >> > > > > > ------------------------------------------------- >> > > > > > This mail sent through IMP: http://horde.org/imp/ >> > > > > > ----------ANNOUNCEMENT---------- >> > > > > > Don't forget to register for WISPCON IV >> > > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > > > > > >> > > > > > The PART-15.ORG smartBridges Discussion List >> > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> > > > > > smartBridges <yournickname> >> > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type >> > > > > > unsubscribe smartBridges) >> > > > > > Archives: http://archives.part-15.org >> > > > > >> > > > > ----------ANNOUNCEMENT---------- >> > > > > Don't forget to register for WISPCON IV >> > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > > > > >> > > > > The PART-15.ORG smartBridges Discussion List >> > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> > > > smartBridges <yournickname> >> > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type GV> unsubscribe >> > > > smartBridges) >> > > > > Archives: http://archives.part-15.org >> > > > > >> > > > >> > > > >> > > > ----------ANNOUNCEMENT---------- >> > > > Don't forget to register for WISPCON IV >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > > > >> > > > The PART-15.ORG smartBridges Discussion List >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> > > > smartBridges <yournickname> >> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type >> > > > unsubscribe smartBridges) >> > > > Archives: http://archives.part-15.org >> > > ----------ANNOUNCEMENT---------- >> > > Don't forget to register for WISPCON IV >> > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > > >> > > The PART-15.ORG smartBridges Discussion List >> > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> smartBridges >> > > <yournickname> >> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >> > > smartBridges) >> > > Archives: http://archives.part-15.org >> > > >> > > >> > >> > >> > Martin Moreno >> > Blazen Wireless >> > 909-907-4106 >> > www.blazenwireless.com >> > ----------ANNOUNCEMENT---------- >> > Don't forget to register for WISPCON IV >> > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > >> > The PART-15.ORG smartBridges Discussion List >> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> smartBridges <yournickname> >> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >> smartBridges) >> > Archives: http://archives.part-15.org >> > >> > >> >> ----------ANNOUNCEMENT---------- >> Don't forget to register for WISPCON IV >> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> >> The PART-15.ORG smartBridges Discussion List >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe GV> smartBridges <yournickname> >> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe GV> smartBridges) >> Archives: http://archives.part-15.org >> >> GV> ----------ANNOUNCEMENT---------- GV> Don't forget to register for WISPCON IV GV> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm GV> The PART-15.ORG smartBridges Discussion List GV> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> GV> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) GV> Archives: http://archives.part-15.org -- [This E-mail scanned for viruses by Declude Virus] ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
