Mostly time and money. Kevin Summers KISTech Internet Services Inc. www.kistech.com
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Eje Gustafsson > Sent: Saturday, September 06, 2003 1:57 PM > To: Kevin Summers > Subject: Re: [smartBridges] OT: Cisco help. > > > Just curious why are you not doing pppoe from the 1601 ? > If memory serves me right there IOS for 1601 that support pppoe. > > Best regards, > Eje Gustafsson mailto:[EMAIL PROTECTED] > The Family Entertainment Network http://www.fament.com > Phone : 620-231-7777 Fax : 620-231-4066 > - Your Full Time Professionals - > -- > > KS> Yes, I believe that is what I'm looking for. I'll let > KS> you know if it works when they turn up the circuit on > KS> Monday. > > KS> Basically I've got, > > KS> MikroTik Router (PPPoE Server) > KS> 192.168.254.1 > KS> | > KS> | > KS> Cisco 2611 > KS> | > KS> | > KS> (frame-relay T1) > KS> | > KS> | > KS> Cisco 1602 > KS> | > KS> | > KS> Customer (PPPoE Login) > > KS> I just need their PPPoE traffic to be able to bridge across > KS> to the MikroTik. > > KS> Kevin Summers > KS> KISTech Internet Services Inc. > KS> www.kistech.com > > > > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED] Behalf Of Rob Genovesi > >> Sent: Saturday, September 06, 2003 10:30 AM > >> To: [EMAIL PROTECTED] > >> Subject: RE: [smartBridges] OT: Cisco help. > >> > >> > >> Kevin, > >> > >> I think this might be what your looking for : > >> > >> # 2611 > >> ------------------------------------------- > >> ! turn on integrated routing/bridging > >> bridge irb > >> > >> interface Ethernet0/1 > >> no ip address > >> bridge-group 1 > >> ! > >> interface Serial 0/0 > >> no ip address > >> bridge-group 1 > >> ! > >> interface BVI 1 > >> description bridge interface for bridge-group 1 > >> ip address 192.168.254.x 255.255.255.0 > >> ! > >> bridge 1 protocol ieee > >> bridge 1 route ip > >> ------------------------------------------- > >> > >> > >> Repeat the same basic setup on the 1602 at the other end of the frame. > >> > >> Use exec command "show bridge verbose" and "show arp" to see if your > >> bridging is working as expected. > >> > >> Feel free to contact me if you need more help. > >> > >> > >> > >> -Rob > >> > >> > >> > >> At 06:17 PM 9/5/2003 -0700, you wrote: > >> > >> >I have a Cisco 2611 with a WIC-1DSU-T1 and a 1602 with a > >> >WIC-1DSU-T1. I want to connect Ethernet0/1 of the 2611 to > >> >my internal network and do transparent bridging across the > >> >T1 frame to the 1602 and on to the Ethernet0 interface there. > >> >The default gateway on the LAN is 192.168.254.1/24 and I'm > >> >using a PPPoE device on the other end that will need to be > >> >able to reach the LAN. > >> > > >> >It's theoretically a VERY simple configuration. I just have > >> >little to no experience configuring Cisco routers. > >> > > >> >Kevin Summers > >> >KISTech Internet Services Inc. > >> >www.kistech.com > >> > >> ----------ANNOUNCEMENT---------- > >> Don't forget to register for WISPCON IV > >> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > >> The PART-15.ORG smartBridges Discussion List > >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > >> smartBridges <yournickname> > >> To Remove: mailto:[EMAIL PROTECTED] (in the body type > >> unsubscribe smartBridges) > >> Archives: http://archives.part-15.org > KS> ----------ANNOUNCEMENT---------- > KS> Don't forget to register for WISPCON IV > KS> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > KS> The PART-15.ORG smartBridges Discussion List > KS> To Join: mailto:[EMAIL PROTECTED] (in the body type > subscribe smartBridges <yournickname> > KS> To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > KS> Archives: http://archives.part-15.org > > -- > [This E-mail scanned for viruses by Declude Virus] > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
