FDISC will do it just fine.
Kevin B. Proctor
Customer Service
Internet and International Orders
Electro Comm Distributing Inc
5015 Paris St
Denver CO 90239
USA
Phone: +1-303-371-8182
800-525-0173
FAX: +1-303-371-8158
800-423-8018
[EMAIL PROTECTED]
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gloria Vester
Sent: Saturday, September 06, 2003 7:52 AM
To: [EMAIL PROTECTED]
Subject: Re: [smartBridges] Client Authentication
Yes, it is set to boot from CD. It is actually a good motherboard, an
ECS
K7S5A, one we have used a lot in systems and had very good luck with. I
think Kevin may have hit it on the head - there may be a previous
install of
some other software on the HD that is causing the problem. I am going
to
try and use a disk wipe utility to clear any partitions on the hard
drive
and try the boot from CD again.
Thanks,
Gloria
----- Original Message -----
From: "John Banes" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, September 06, 2003 8:05 AM
Subject: Re: [smartBridges] Client Authentication
> Your BIOS does support boot from CD? The old junker we use for a test
box
> doesn't and we have to load from the Floppy drive.
>
> John
>
> ----- Original Message -----
> From: "Gloria Vester" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, September 05, 2003 07:16 PM
> Subject: Re: [smartBridges] Client Authentication
>
>
> > Thanks for the offer - let me see if I can get the MikroTik working
with
> > Eje's help first. I have already reconfigured my box for that
software
> > instead of the BriLan. If I can get the software to load, then it
> shouldn't
> > be any trouble to setup, Eje walked me through the setup portion on
his
> demo
> > unit. But the CD image file won't work.
> >
> > Gloria
> >
> > ----- Original Message -----
> > From: "Martin Moreno" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Friday, September 05, 2003 8:57 PM
> > Subject: Re: [smartBridges] Client Authentication
> >
> >
> > > IF you need help with ther brilan contact me offline and I will
help
> you..
> > >
> > > Just have to find a day where we can hook up via phone and walk
you
thru
> > it..
> > >
> > > Quoting Gloria Vester <[EMAIL PROTECTED]>:
> > >
> > > > Well, that is what I had heard from others, so decided to try
the
> > BriLan.
> > > > I
> > > > got as far as loading the software on the box, gave it an IP,
and
put
> it
> > on
> > > > my network but couldn't see it. Basically, I couldn't figure
out
what
> > to
> > > > do
> > > > with it and gave up. Then Eje suggested the MikroTik and it
seemed
> easy
> > > > the
> > > > way he told me to set it up, but I can't get the CD version of
the
> > software
> > > > to load on my box, which I know is a working PC. Truthfully, I
have
> had
> > > > very little time to work on it, I've been so busy getting
everything
> > else
> > > > up
> > > > and running and dealing with customers, that I haven't had a lot
of
> time
> > to
> > > > spend on it. But I couldn't get either the BriLan or the
MikroTik
> > software
> > > > to load and work, and I know the box we put them on is good.
> > > >
> > > > Gloria
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Moreno" <[EMAIL PROTECTED]>
> > > > To: <[EMAIL PROTECTED]>
> > > > Sent: Friday, September 05, 2003 8:33 PM
> > > > Subject: Re: [smartBridges] Client Authentication
> > > >
> > > >
> > > > > Brilan is way easier to deal with althought the mikrotik has
more
> > > > features
> > > > but
> > > > > Brilan will have the same by the end of the year. The brilan
demo
> keep
> > in
> > > > mind
> > > > > only works for 2 hours then you have to reboot the box to get
> another
> > 2
> > > > hours I
> > > > > found this out the hard way. It will not work well on those
all in
> one
> > > > machiens
> > > > > like HP, Compaq etc.. I had mine up and running in less then a
1/2
> > hour
> > > > > Miktorik is a pain in the ass to set up and maintain with the
gui
as
> > well
> > > > as
> > > > > without the command line interface.. and trying to get support
> forget
> > ti
> > > > I
> > > > went
> > > > > 3 months postig to their mail forum trying to figure out how
to do
> > bridge
> > > > mode
> > > > > and no one ever answered so I went to Brilan Tony is awesome
and
> > > > sometimes
> > > > > answers at wierd hours when you least expect it which is
awesome..
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > You have to jump throug 3-4 hoops to make a bandwidth queue
then
mac
> > > > > autehntication is a pain then you haev to do several other
thigns
to
> > > > throttle
> > > > > one customer where as brilan takes abotu 2 steps and takes me
less
> > then 2
> > > > min
> > > > > to configure a user..
> > > > >
> > > > >
> > > > > Quoting Gloria Vester <[EMAIL PROTECTED]>:
> > > > >
> > > > > > OK, can you help me figure out why the MikroTik router
software
I
> > > > downloaded
> > > > > > and burned to CD won't load on the box we built for it? I
have
> > burned
> > > > the CD
> > > > > > three times, downloaded the file twice, but it will not
load.
> When
> > I
> > > > try to
> > > > > > boot from the CD, it comes up to the first line, something
about
> > > > loading
> > > > a
> > > > > > kernel, then beeps and throws garbage on the screen that
continues
> > > > rolling
> > > > > > until you shut it off. We built a box with an ECS K7S5A
mobo,
700
> > MHz
> > > > AMD
> > > > > > proc, 3 GB HD, and standard AGP video card. Any ideas? I
have
> been
> > on
> > > > the
> > > > > > air for over a month now with no bandwidth control, even
though
I
> am
> > > > selling
> > > > > > tiered bandwidth, because I have not been able to get
anything
> > working.
> > > > I
> > > > > > tried the BriLan demo and couldn't get it working, now the
> MikroTik
> > > > won't
> > > > > > even load.
> > > > > >
> > > > > > Thanks for any help,
> > > > > > Gloria
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: Kevin Summers
> > > > > > To: [EMAIL PROTECTED]
> > > > > > Sent: Friday, September 05, 2003 6:35 PM
> > > > > > Subject: RE: [smartBridges] Client Authentication
> > > > > >
> > > > > >
> > > > > > The MikroTik router OS runs on just about any old PC you
might
> > > > > > have laying around. Throw two network cards into it and
you've
> got
> > > > > > a router.
> > > > > > Kevin Summers
> > > > > > KISTech Internet Services Inc.
> > > > > > www.kistech.com
> > > > > >
> > > > > >
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: [EMAIL PROTECTED]
> > > > > > [mailto:[EMAIL PROTECTED] Behalf Of Sevak
Avakians
> > > > > > Sent: Friday, September 05, 2003 3:51 PM
> > > > > > To: [EMAIL PROTECTED]
> > > > > > Subject: RE: [smartBridges] Client Authentication
> > > > > >
> > > > > >
> > > > > > Hi Kevin,
> > > > > >
> > > > > > I've taken a look at MicroTik's website and it seems to
be
> > software
> > > > that
> > > > > > runs on a desktop. Is this correct or is it a separate
piece of
> > > > hardware
> > > > > > similar to a Linksys or Cysco, etc. router?
> > > > > >
> > > > > > Thanks,
> > > > > > Sevak
> > > > > >
> > > > > > On Thu, 2003-09-04 at 19:25, Kevin Summers wrote:
> > > > > > Actually it's just the PPTP and HotSpot clients that get the
> > > > > > DHCP addresses. PPPoE clients just get their assigned IP
from
> > > > > > the PPPoE login.
> > > > > >
> > > > > > The MikroTik router actually handles the HotSpot login page.
> Through
> > > > > > the use of Firewall rules we've set things up to allow a
link
from
> > > > > > the HotSpot login page to a secure page on our web server so
that
> > > > > > people can sign up.
> > > > > >
> > > > > > Kevin Summers
> > > > > > KISTech Internet Services Inc.
> > > > > > www.kistech.com
> > > > > >
> > > > > >
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: [EMAIL PROTECTED]
> > > > > > > [mailto:[EMAIL PROTECTED] Behalf Of Dennis
> Burgess
> > > > > > > Sent: Thursday, September 04, 2003 4:14 PM
> > > > > > > To: [EMAIL PROTECTED]
> > > > > > > Subject: Re: [smartBridges] Client Authentication
> > > > > > >
> > > > > > >
> > > > > > > Kevin,
> > > > > > >
> > > > > > > Question,
> > > > > > >
> > > > > > > Why do you need to give your clients a DHCP IP ? The
PPPOE
does
> > that
> > > > > > > already correct? Also, using the hotspot stuff, if a
custoemer
> > > > assoicates
> > > > > > > with one of my APs, could i setup a way so that they could
only
> > get
> > > > to
> > > > my
> > > > > > > webserver? or a speical page saying, you can get our
signal
??
> > > > > > >
> > > > > > > Dennis
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "Kevin Summers" <[EMAIL PROTECTED]>
> > > > > > > To: <[EMAIL PROTECTED]>
> > > > > > > Sent: Wednesday, September 03, 2003 6:23 PM
> > > > > > > Subject: RE: [smartBridges] Client Authentication
> > > > > > >
> > > > > > >
> > > > > > > >
> > > > > > > > We're using the MikroTik Router OS for PPTP, PPPoE, and
> HotSpot
> > > > > > > > authentication using username and password. No WEP
encryption
> on
> > > > > > > > any of the network. If it's so insecure, why take the
> > performance
> > > > > > > > hit. Can't do WEP when doing HotSpot anyway...
> > > > > > > >
> > > > > > > > Radios and such are on private static IPs, customers get
a
> > private
> > > > > > > > DHCP IP until they log in, then they are given either
their
> > NATed
> > > > > > > > private DHCP IP, or their public static IP.
> > > > > > > >
> > > > > > > > Kevin Summers
> > > > > > > > KISTech Internet Services Inc.
> > > > > > > > www.kistech.com
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: [EMAIL PROTECTED]
> > > > > > > > > [mailto:[EMAIL PROTECTED] Behalf Of
Rudolph
> > > > Worrell
> > > > > > > > > Sent: Wednesday, September 03, 2003 4:08 PM
> > > > > > > > > To: [EMAIL PROTECTED]
> > > > > > > > > Subject: [smartBridges] Client Authentication
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > How do you authenticate your customers? I am simply
suing
> WEP
> > > > and
> > > > a
> > > > > > > DHCP
> > > > > > > > > server.
> > > > > > > > >
> > > > > > > > > How many IP's do you have in your IP pool? I have
1000
but
> I
> > am
> > > > > > > > > not sure it
> > > > > > > > > will be enough when I get up to about 250 customers.
> > > > > > > > >
> > > > > > > > > I use a separate IP scheme for the CPE and backhuals
and
> this
> > > > works
> > > > > > > fine.
> > > > > > > > >
> > > > > > > > > Anyone else doing this?
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Rudolph Worrell
> > > > > > > > > President
> > > > > > > > > Phone:(540)664-3950
> > > > > > > > > Fax:(270)458-6431
> > > > > > > > > www.wave2net.com
> > > > > > > > >
> > > > > > > > > -------------------------------------------------
> > > > > > > > > This mail sent through IMP: http://horde.org/imp/
> > > > > > > > > ----------ANNOUNCEMENT----------
> > > > > > > > > Don't forget to register for WISPCON IV
> > > > > > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> > > > > > > > >
> > > > > > > > > The PART-15.ORG smartBridges Discussion List
> > > > > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type
> > subscribe
> > > > > > > > > smartBridges <yournickname>
> > > > > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body
type
> > > > > > > > > unsubscribe smartBridges)
> > > > > > > > > Archives: http://archives.part-15.org
> > > > > > > >
> > > > > > > > ----------ANNOUNCEMENT----------
> > > > > > > > Don't forget to register for WISPCON IV
> > > > > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> > > > > > > >
> > > > > > > > The PART-15.ORG smartBridges Discussion List
> > > > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type
> subscribe
> > > > > > > smartBridges <yournickname>
> > > > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type
> > > > unsubscribe
> > > > > > > smartBridges)
> > > > > > > > Archives: http://archives.part-15.org
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > ----------ANNOUNCEMENT----------
> > > > > > > Don't forget to register for WISPCON IV
> > > > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> > > > > > >
> > > > > > > The PART-15.ORG smartBridges Discussion List
> > > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type
subscribe
> > > > > > > smartBridges <yournickname>
> > > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type
> > > > > > > unsubscribe smartBridges)
> > > > > > > Archives: http://archives.part-15.org
> > > > > > ----------ANNOUNCEMENT----------
> > > > > > Don't forget to register for WISPCON IV
> > > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> > > > > >
> > > > > > The PART-15.ORG smartBridges Discussion List
> > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type
subscribe
> > > > smartBridges
> > > > > > <yournickname>
> > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type
> unsubscribe
> > > > > > smartBridges)
> > > > > > Archives: http://archives.part-15.org
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > Martin Moreno
> > > > > Blazen Wireless
> > > > > 909-907-4106
> > > > > www.blazenwireless.com
> > > > > ----------ANNOUNCEMENT----------
> > > > > Don't forget to register for WISPCON IV
> > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> > > > >
> > > > > The PART-15.ORG smartBridges Discussion List
> > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type
subscribe
> > > > smartBridges <yournickname>
> > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type
unsubscribe
> > > > smartBridges)
> > > > > Archives: http://archives.part-15.org
> > > > >
> > > > >
> > > >
> > > >
> > > > ----------ANNOUNCEMENT----------
> > > > Don't forget to register for WISPCON IV
> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> > > >
> > > > The PART-15.ORG smartBridges Discussion List
> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > smartBridges
> > > > <yournickname>
> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type
unsubscribe
> > > > smartBridges)
> > > > Archives: http://archives.part-15.org
> > > >
> > >
> > >
> > > Martin Moreno
> > > Blazen Wireless
> > > 909-907-4106
> > > www.blazenwireless.com
> > > ----------ANNOUNCEMENT----------
> > > Don't forget to register for WISPCON IV
> > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> > >
> > > The PART-15.ORG smartBridges Discussion List
> > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > smartBridges <yournickname>
> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type
unsubscribe
> > smartBridges)
> > > Archives: http://archives.part-15.org
> > >
> > >
> >
> >
> > ----------ANNOUNCEMENT----------
> > Don't forget to register for WISPCON IV
> > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> >
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> > Archives: http://archives.part-15.org
> >
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org
>
>
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
