36dbi for PtMP ----- Original Message ----- From: "Blazen Wireless" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, September 09, 2003 3:23 PM Subject: Re: [smartBridges] How do I improve a link?
> What's max irp for the AP side of it maybe he is concerned there too? > > ----- Original Message ----- > From: "John Hokenson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, September 09, 2003 12:14 PM > Subject: Re: [smartBridges] How do I improve a link? > > > No it doesn't The power indication is incorrect. At max power you are only > putting out 17dBm > Radio +17dBM > Antenna +24dBm > EIRP 41dBm > Max EIRP allowed PtMP CPE 48dBm > > JH > ----- Original Message ----- > From: "Cesar" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, September 09, 2003 10:29 AM > Subject: RE: [smartBridges] How do I improve a link? > > > > No, I don't have the power bar all the way to the top, on either radio, > > since that will put me above the FCC's stipulations. > > > > > > -C�sar > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless > > Sent: Tuesday, September 09, 2003 9:50 AM > > To: [EMAIL PROTECTED] > > Subject: Re: [smartBridges] How do I improve a link? > > > > HMM once again I might have to agree you may be out of range do you have > > the > > power bar all the way up on the customer unit? Is the power setting all > > the > > way up on your APPO as well?? > > > > > > ----- Original Message ----- > > From: "Cesar" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, September 09, 2003 9:30 AM > > Subject: RE: [smartBridges] How do I improve a link? > > > > > > There are only two other APs available. One belongs to the customer, > > and the other one seems to be much weaker than mine. Also, I use > > channel 1 and the other two are using channel 11. > > > > -C�sar > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless > > Sent: Tuesday, September 09, 2003 9:23 AM > > To: [EMAIL PROTECTED] > > Subject: Re: [smartBridges] How do I improve a link? > > > > HMM question when you go to site survey and click on choose from > > available > > access points are there any others listed besides yours? > > > > One other thing to try is switching channels I spent one night going > > from > > 1-11 and found those two great channels you may have to play around > > with > > them especially if there are other Access points around or near yours or > > the > > customer.. > > > > > > ----- Original Message ----- > > From: "Cesar" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, September 09, 2003 9:08 AM > > Subject: RE: [smartBridges] How do I improve a link? > > > > > > Sully, > > > > Here are the answers: > > 1. We are not using LMR, other than the pig tail that connects to the > > Outdoor Radio. We are just using the CAT5 for data and PoE. > > 2-3. The antenna is aligned properly, at least we like to think so. > > When we mounted it we made sure to set it where the strongest signal > > was. In other words we did play with the azimuth and elevation. > > > > As you can see we have played with it in order to optimize it as much as > > possible. I am running out of options and do NOT want to put an Amp. > > This is a very nice customer that has a farm way out in the country > > side--he has to generate his own power. > > > > Thanks Sully, and please let me know if you have any more > > ideas/suggestions. > > > > -C�sar > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree > > Network > > Sent: Tuesday, September 09, 2003 8:50 AM > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] How do I improve a link? > > > > I am going to state a few more obvious points...because with those > > antennas, you should have a stronger RSSI at the client. > > > > 1. How much LMR cable (if any) are you using between the radio and the > > antennas? Hopefully you are not using LMR, just CAT5. > > 2. Is your Sector Antenna parallel to the earth or is it mechanically > > downtilted? Your RF may be falling short of the client. > > 3. After verifying the above, has your client antenna been properly > > aligned (tweaked)? > > > > > > Sully > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Cesar > > Sent: Tuesday, September 09, 2003 8:31 AM > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] How do I improve a link? > > > > Sorry, I'm getting forgetful in my old age. The RSSI is 35% and the LQ > > is 65%. > > > > I'm using 90deg Sector Antennas, and yes he is within the RF path of the > > antenna. > > > > -C�sar > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree > > Network > > Sent: Tuesday, September 09, 2003 8:18 AM > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] How do I improve a link? > > > > Did you state somewhere what the RSSI and LQ is? With that setup, you > > should be getting around 70% RSSI. > > > > What degree sector panel are you using? Does your client lie within the > > RF spread of the antenna? > > > > Need the RSSI/LQ to give more advice. > > > > Sully > > > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Cesar > > Sent: Tuesday, September 09, 2003 8:07 AM > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] How do I improve a link? > > > > Hi everyone, > > > > I need your help/advice on improving a customer's connection. He is > > 10.5 miles away from my APPO (14.5 Sector antenna) and there is a clear > > LOS. He is using an Outdoor airBridge and a 24dBi grid antenna. At > > this point in time there are no amps involved, but I am seriously > > considering to install one at the clients site. > > > > Do you think that an Amp would solve the problem? Or do you have > > something in your bag of tricks that I can use? > > > > Any and all help will be greatly appreciated. > > > > TIA, > > > > -C�sar > > > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
