Re: [smartBridges] ABO won't connect thru router...

[David Blood]

The ends on the powershots have been punhed down alittle toomuch at the factory I think.  I had a laptop that had very itermitent conectivity because of this. I had one customer replace his router because of it.  Try using a cat5 coupler between the router and the powershot with another patch cable (not one of smartbridges). Worked for me.   David  ----- Original Message ----- From: Bobby Bounds To: [EMAIL PROTECTED] Sent: Saturday, September 20, 2003 12:04 AM Subject: [smartBridges] ABO won't connect thru router... ....but WILL when connected directly to a NIC!   Spent half the day today (at an install....ughhh) dicking around with this.   I setup an ABO at a car dealership.......connected it directly to my PC....worked great.   Then I plugged the ABO into the WAN port of a Linksys router. The link light on the router did not even light up. Tried pinging thru the router....no bueno. Tried another new router.....same problem. Re-crimped everything....still no good. Tried three different POE's and power supplies. Flipped the dumb little crossover switch on the POE a million times. Cycled power on everything a million times.....no success.   Factory reset the ABO .....downloaded latest firmware and simplemonitor.....this made no difference.    On one of the routers the WAN link light seemed at times to blink in cadence with the activity light....but not consistently.   The ABO is about a month old....came off a house where induced surge from nearby electrical storms was present.   Does anyone have any ideas? Did the surge somehow mess up the ethernet side of the radio in such a way as to create these symptoms. Am I missing something? What else should I be trying?      Many thanks,   Bobby Bounds Airwave Internet, LLC