|
Let me run this scenario by you guys.
Internet Router’s EthernetàSwitchà[EMAIL PROTECTED] SiteàABOàHubàAPPOàABO
If I want to allow the 2nd ABO to access the Internet through the Tower Site, what mode will I have to set on the 2nd APPO assuming the 1st APPO is in Access Point Mode? And will the IP addressing listed below work for the link?
IP addressing is as follows:
Internet Router 10.10.10.1 Subnet 255.255.255.0 APPO @ Tower Site 10.10.10.2 Subnet 255.255.255.0 Default Gateway 10.10.10.1 1st ABO 10.10.10.3 Subnet 255.255.255.0 Default Gateway 10.10.10.1 2nd APPO 10.10.10.4 Subnet 255.255.255.0 Default Gateway 10.10.10.1 2nd ABO 10.10.10.5 Subnet 255.255.255.0 Default Gateway 10.10.10.1
Im not sure about the Gateway addresses for everything on the backside of the first APPO, and will I have to enable non IP traffic in order to use the same gateway?
Thanks,
|
