|
It would be cheaper to
put in Linksys Cable/DSL VPN
routers and establish a
VPN between offices. However..
Your diagram doesn't show
which direction buildings B
and C are from A, but if
they are on opposite sides, use
two radios and two
antennas at the main office. High gain
tight beam such as a Pac
Wireless 19db grid. If B and C
would fall within the
horizontal beamwidth, use a sector
antenna and 1 radio.
The same 19db antennas at B and C
should do the job. Try
and stay away from using an OMNI.
Almost any manufacturer's
radio will do. It just depends
on budget and how
reliable you want it to be.
Hi,
Could you please help me to select and to
form the better and economical solution for unite wirelessly 3 furnitures
with your products?
I've attached the layout so that you have
one better project's perspective .
At this time in the 3 offices I have working a
wired network Ethernet 10/100mbps, also I have in each one of them the
Internet's DSL Service, with a router DSL with the DHCP's
service activated with network 192.168.0.0.
Please consider that I have line of sight between
the central office and both remote Offices B and C
Which equipments do I need in each
building and which configuration I must use so that the 3 offices can subsist
without affecting the performance of each one of them and without causing
collisions?
Regards
Ing. Juan Carlos Mart�nez M.
Gerente
General
Comuni-k
1401 Industrial Blvd, 78852
Eagle Pass, TX
----------------------------------
Comuni-k SA de CV
http://www.comuni-k.com
Tel.
(878) 782-57-00
Fax (878) 782-74-53
Piedras
Negras, Coah. M�xico
---
Outgoing mail is certified Virus
Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.521
/ Virus Database: 319 - Release Date:
23/09/03
| 