I've found it best to power off the unit and then hold the reset button while powering the unit back on. This seems to work every time for me.
_____ Jeremy _____ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Cleminson Sent: Wednesday, October 01, 2003 12:42 PM To: [EMAIL PROTECTED] Subject: [smartBridges] Reset Button I have a SmartBridges APPO and am having trouble reseting the unit using the reset button on the Powershot - sometimes it resets if I hold it for 30secs but most of the time it does not reset Any Advice? Regards Rob Cleminson ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
