RE: [smartBridges] simplespeed

[Chris Chance]

If not it should lower it below 1400 for mail problems   From: Peter Cartwright [mailto:[EMAIL PROTECTED] Sent: Thursday, October 09, 2003 9:50 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] simplespeed   That's news to me - previously I'd been led to believe it just altered the MTU!   Peter   Loop Scorpio Ltd providers of Ledbury Broadband and Highnam Broadband www.ledburybroadband.co.uk www.highnambroadband.co.uk -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Seeni Mohamed Sent: 09 October 2003 18:40 To: [EMAIL PROTECTED] Subject: RE: [smartBridges] simplespeed Hi Scott,   The SimpleSpeed does not changes the MTU interface settings and does the changes in the TCP/IP windows size only.   To increase the throughput speed at the CPE, simpleSpeed optimizes these protocol stack parameters to improve performance of wireless LANs which make use of smartBridges products (airBridge, airPoint, airPointPRO).   Here are the changes done in the registry.   GlobalMaxTcpWindowSize REG_DWORD 131400 (decimal) TcpWindowSize REG_DWORD 131400 (decimal) Tcp1323Opts REG_DWORD 1   Thank you   Best regards, Seeni sB Tech support [EMAIL PROTECTED]     -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of shoffman Sent: Thursday, October 09, 2003 11:27 PM To: [EMAIL PROTECTED] Subject: [smartBridges] simplespeed     I know that we should trust our vendor completely....   But does anyone know if simplespeed adjusts the default MTU settings on the interface?  If so.. what does it set it to?   Scott   ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm   The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org