We are experimenting with open source tool
NetSNMP. It looks quite promising. So just hang in
there and we may be able to give you guys a good solution.
Nimesh
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Chris Chance
Sent: Friday, October 10, 2003
10:10 AM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges] aBT
w/N connector - Pocket PC simpleMonitor
I was the
one developing it. But do to some financial/technical problems gave up at
current because the plugin for pocketpc snmp isn't on the cheap side im looking
to get a copy still but have yet to get it. Sorry so far guys :(
Chris
-----Original
Message-----
From: Seeni Mohamed [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 09, 2003
2:46 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] aBT w/N
connector - Pocket PC simpleMonitor
Hi Homer
Parker,
Yes, in
the wireless bridge option there is no site survey and link
status option available and we are
unable to include this function in
the WB mode.
However,
the best way to test the signal strength is to configure as
AP-CB mode combination and test the
link status.
Once you have confirmed with this
result, then you can go ahead and
configure as a point to point
wireless bridges.
To make
sure that WB mode is working, please check that both units are
set to Wireless Bridge mode -point
to point, input the Mac address of
the opposite unit and configure on
the same channel. Then PING and test
the link from the both end.
Best
regards,
Seeni
sB Tech support
[EMAIL PROTECTED]
-----Original
Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
On Behalf Of Homer Parker
Sent: Friday, October 10, 2003 5:41
AM
To: [EMAIL PROTECTED]
Subject: Re: [smartBridges] aBT w/N
connector - Pocket PC simpleMonitor
On Thu, 9
Oct 2003 13:55:31 -0700
"Colorado Wisp"
<[EMAIL PROTECTED]> wrote:
>
Better yet, how about a Pocket PC version of simpleMonitor for
> Airbridge. It appears
simpleMonitor is VB, so it should not be that
hard
> to convert. I know
someone is working on it, sB should come up with
> some money to pay the guy or
develop it. Canopy has a Pocket PC
> interface, time for sB to
build it too!
If we're asking, how
about a way to manage them from Linux ;) I
was out
looking at the SB products at
another ISP... As he was showing me the
setup, and available options,
SimpleMonitor locked up on his laptop...
Locked up the APPO... Not a good
result, took a power cycle for the APPO
to come back to life :( Just an
idea.. A simple text interface available
via ssh (as long as it's not as
convoluted as the Cisco 340 ;) would
suit
me just fine.. Cross platform, and
could still use GUI utils if you
wanted
as we have now via SNMP... Another
plus would be, you don't always have
the GUI utils with you, but a quick
download of an ssh client (there are
free clients for about evey OS out
there), and you're managing the
units..
Again just an idea from someone
just getting into the SB products
(configured my backhaul and AP here
in the office last night)...
I do have a question
;) I setup the backhauls as wireless
bridges.. I
didn't see a way to link test that
setup, what did I overlook?
---
Homer Parker
LAN/WAN,
Wireless Networking, PC Sales/Service
Linux, OS/2 and Windows Support
PC
Services
785.483.7602
129 W 8th #101
[EMAIL PROTECTED]
Russell, KS
67665 http://www.pcsrvc.com
"So
for the IT Manager Role, you want someone who's absolute crap, looks
reasonable on paper, and won't
cause too much trouble. ... Well I don't
have any MCSEs on my books at the
moment, but I could call around."
-- Simon Travaglia
----------ANNOUNCEMENT----------
Don't forget to register for
WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The
PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
----------ANNOUNCEMENT----------
Don't forget to register for
WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The
PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe smartBridges)
Archives: http://archives.part-15.org
