Re: [smartBridges] Slow down problems

[Blazen Wireless]

well after replacing the D-LINK switch up at the tower it made no real difference on the amount of single deffered packets that the APPO is seeing. Is there any other ideas what could cause this if not the switch? I put in a  10 base t hub which should force everything at 10 1/2 duplex I did not try the big old Cisco as it was just to much of a pin to lug up here and add another huge Nema box for it.. ----- Original Message ----- From: Blazen Wireless To: [EMAIL PROTECTED] Sent: Tuesday, September 23, 2003 11:01 PM Subject: Slow down problems Okay I think I have figured out the problem with my system. It seems that when users are one (close users) they are associated to the APPO at 5.5 to 11 megs possibly and the users that are further away are at 1 meg max well if you have the near users at 11 megs tying up the radio and the far uses cant connect at a slower speed for a better link / speed quality then the far users suffer? am I correct in my theory does that make any sense?   So going forward we are going to have to plan some more sites closer to the users having issues etc Has anyone else experienced this. I cant verify 100% that this is true due to the fact the radios don't report what speed they are associated at? Can someone think of a way to validate this theory??   Thanks   Martin & Steve Blazen Wireless www.blazenwireless.com