Homer Parker, Have you tried our recovery utility on the ABO units? OR Please use the simpleDeploy to re flash the configuration file and the try again.
Kind regards, Seeni sB Tech support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Homer Parker Sent: Wednesday, October 22, 2003 6:07 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Clients can't DHCP On Tue, 21 Oct 2003 11:00:21 -0600 "Kevin Proctor" <[EMAIL PROTECTED]> wrote: > The normal cause for this is that the primary port is not set correctly. > Here is how it should be set for the link below. > > dhcp server - switch - appo (backhaul) appo - switch - appo - abo > ethernet wireless ethernet - > wireless Ok, after watching Windows reboot for 30 minutes, here's what I have found: 1) The only way to the ABO is if I'm in the same net block as it is (that's the reason for all the reboots). 2) I still have not got the DHCP response back through the ABO. 3) I stuck an Orinoco silver in my laptop, and got the DHCP response. Went surfing just fine. 4) Orinoco cards are not good for sniffing wireless traffic :( (I'm using Ethereal in Linux) Some recommendations are needed. I have turned off encryption, set the ABO to open, no MAC authentication, basically it's wide open for anyone to connect to, but I'm still not getting the DHCP response :( --- Homer Parker LAN/WAN, Wireless Networking, PC Sales/Service Linux, OS/2 and Windows Support PC Services 785.483.7602 129 W 8th #101 [EMAIL PROTECTED] Russell, KS 67665 http://www.pcsrvc.com "So for the IT Manager Role, you want someone who's absolute crap, looks reasonable on paper, and won't cause too much trouble. ... Well I don't have any MCSEs on my books at the moment, but I could call around." -- Simon Travaglia ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
