You can change the default channel using simpleDeploy for the airBridge. Also the channel for the airBridge TOTAL will depend on the channel on which the access points is operating on
With Best Regards,' Vasu -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of S�mundur Johannsson Sent: Friday, October 31, 2003 5:12 AM To: [EMAIL PROTECTED] Subject: [smartBridges] Air Bridge Total / Default Channel Hi ,, I connected to day 8 Bridge Total,, worked fine , but unable to set default channel to 1. On all this 8 bridge it was stuck on channel 7 no way to set to channel 1... What can be wrong here ? S�mundur Johannsson Technician eMax Wireless Internet Hlidasmari 8 201 Kopavogur Iceland Tel :(354) 5444454 FAX :(354) 5444453 www.emax.is ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
