Nimesh If you would use a larger U bolt with the v in the back of it then it would fit different size poles
Joe K -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Nimesh D. Parikh Sent: Thursday, November 06, 2003 5:30 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Brackets - NEVERMIND What diameter bolt do you use? It should be easy for us to change the hole size. Nimesh -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rick Kunze Sent: Friday, November 07, 2003 12:47 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Brackets - NEVERMIND Well, one thing I run into when mounting them on my tower, is that if you use a U-bolt that is the widest the APPO will support (between the single hole and the far end of the slot), you have to drill the holes out because U-bolts that size are larger in diameter than the holes. Minor detail, and it may only be an issue here in the States. Rk At 08:27 PM 11/5/2003, you wrote: >Nevermind. I just realized the bolt is a defect. Its split up the middle. >Sorry for the unnecessary post(s) > > > > Am I crazy or doesn't the 1/4" bolt fit into the hole on the fins on back >of > > the airBridge Total? > > === > > Rick Kosick > > StarLinX Internet Service > > > >The PART-15.ORG smartBridges Discussion List >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >smartBridges <yournickname> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >smartBridges) >Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
