You don't nessecarily need to purchase a bonded T1. You can just purchase another t1. If you have a cisco router all you need to do is setup ppp multilink between your two serial interfaces that your t1's are coming in on and you can get roughly 2.9MB out of it.
Quoting Blazen Wireless <[EMAIL PROTECTED]>: > We have not converted everybody over to the new line yet Right now we are > waiting for the new SB line to come out so we can swap out the APPO's we > have up there that are working like crap with a total of 60 users between 2 > APPO's that is our weak link now. > > > Doing a ping to yahoo from at&t lines from the noc it blows away megapath we > get 20 ms right to them almost everytime with megapath it jumps all over the > place and the lowest I have seen is maybe 50-60ms and highs as much as 150 > 200ms. Well worth the money we spent to go with AT&T so when our lease is up > with megapath we are going to order another t-1 from AT&T and we will have > 4.5 megs available! > > The AT&T was more we pay about $1600 for the managed 3600 Cisco and the dual > t-1's with megapath we have a cheap siemens router we control that they made > us pay for and we manage it ourselves it runs $651 for the month. > > Overall like I said AT&T is awesome we had to pay $1600 as a deposit since > we have not established a lot of credit but they charged us $0 install and > $0 for the router... so anyone else with a better credit rating will do > better and may not have to pay the $1600 deposit... > > -M > ----- Original Message ----- > From: "Pascal Losier" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, November 14, 2003 4:17 PM > Subject: RE: [smartBridges] Multiple T1 Question > > > How many custumer on 2.9Mb ??? > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless > Sent: Friday, November 14, 2003 8:15 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Multiple T1 Question > > > AT&T and its awesome!! we have 2 T-1a bonded to 3 meg which we see on > avg 2.6 -2.9 megs > ----- Original Message ----- > From: "Rick Kosick" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, November 14, 2003 4:02 PM > Subject: [smartBridges] Multiple T1 Question > > > Does anyone out there currently use a provider that will bond (mux) > multiple T1s? I can only find providers who will load-balance for > aggregate bandwidth and I don't need T3. > > Please email me offlist. [EMAIL PROTECTED] > Thanks!! > > === > Rick Kosick > StarLinX Internet Service > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > ------------------------------------------------- SCI Online Email http://webmail.scinternet.net/ The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
