RE: [smartBridges] Warped ABT Cover Revisited

[Pascal Losier]

Title: Message

APPO was 70feet in a tower & ABO is 125feet on another tower.   APPO is now at RMA since it loss ethernet.   But ABO with 24db grid is fine running a 13mile link from a 12db omni. 60%RSSI & 80%Quality. . -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nimesh D. Parikh Sent: Monday, November 24, 2003 10:33 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Warped ABT Cover Revisited This is strange. Are these units located near some heat source? Perhaps chimney or something similar? We use boxes made from Poly Carbonate material suitable for outdoor environment and extreme temperature variations.   Nimesh     From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pascal Losier Sent: Tuesday, November 25, 2003 8:32 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Warped ABT Cover Revisited   I have notice the same on a APPO & ABO -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Castella Sent: Monday, November 24, 2003 8:19 PM To: [EMAIL PROTECTED] Subject: [smartBridges] Warped ABT Cover Revisited Today we inspected an ABT that had been deployed outdoors for about 5 months, and found the front cover warped enough to probably allow water to leak into the unit. All four cover edges were warped. The cover retaining screws were still tight and had never been removed.