Hi, We have several people using VoIP on our system. We have not heard any complaints from customers. Our frag is at 1066 and RTS is at 128 on our client's radios. Compressed VoIP uses a steady 20k up and down and uncompressed VoIP uses about 80k down and 30k up. We run a YDI BCU for shaping.
Chris --- Colorado WISP llc. http://www.cowisp.net Bringing high speed internet to rural communities. P.O. Box 55 Wellington, Colorado 80549 970-218-5295 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, November 25, 2003 11:59 AM To: [EMAIL PROTECTED] Subject: [smartBridges] VOIP over sB? Anyone using VOIP over sB equipment? Just got an email from a customer and he sits right under my tower with decent RSSI/LinkQ. Dunno what VOIP system he's using, but he says it drops out often like a bad cell phone. Thoughts/suggestions? (btw... I have a 3mb upstream link with not much bw shaping for my customers. I know these devices require a steady stream, but surely there's more to it than that?? I dunno) Tim Foster www.AledoBroadBand.com Aledo's only high-speed ISP The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
