You may need to use an airPoint in CB mode rather than an airBridge for your backhaul. We found that an airBridge simply would not rout through our IP-Cop gateway. A simple swap to an airPoint set in CB mode (suposedly the same thing as an airBridge) sorted out the problem.
----- Original Message ----- From: "Geo_p15sb" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, November 26, 2003 4:54 AM Subject: Re: [smartBridges] antenna distance > with extreme channel seperation and oposite polarities you can do this: > http://www.oregonfast.net/~gofast/mpop/mpop%20011.JPG > George > > [EMAIL PROTECTED] wrote: > > ACK!! > > > > Just got word from the fire department that they're installing their radio > > gear today and if I want to be up on their tower, I need to be out there > > in 3 hours. > > > > Any recommendations on antenna distance between backhaul and AP antenna? > > > > This relay tower will only service ~20 customers for now, so I'm going to > > use an airPoint associated to the one of the APs at the primary tower, run > > it into a switch and then into another airPoint. 18dB panel aimed at the > > tower, with a sectored (because I don't have an omni) aimed at the > > subdivision in question. > > > > My question... How far apart must/should the 2 antennas need to be? I'm > > hoping I can have them 10 vertical feet apart, with the backhaul on V and > > AP on H, but I don't know that I'll have that luxury. > > > > I need some *reliable* (no offense ;) answers quick. > > > > Thanks. > > > > Tim Foster > > www.AledoBroadBand.com > > Aledo's only high-speed ISP > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > > Archives: http://archives.part-15.org > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
