found on smartmontools-support.
smartctl version 5.1-9 Copyright (C) 2002-3 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     QUANTUM FIREBALLlct15 22
Serial Number:    313019116552
Firmware Version: A01.0F00
ATA Version is:   5
ATA Standard is:  ATA/ATAPI-5 T13 1321D revision 1
Local Time is:    Sat Mar 29 21:14:45 2003 localtime
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Off-line data collection status: (0x00) Offline data collection activity was
                                         never started.
Self-test execution status:      (   0) The previous self-test routine completed
                                         without error or no self-test has ever
                                         been run.
Total time to complete off-line
data collection:                 (   2) seconds.
Offline data collection
capabilities:                    (0x1b) SMART execute Offline immediate.
                                         Automatic timer ON/OFF support.
                                         Suspend Offline collection upon new
                                         command.
                                         Offline surface scan supported.
                                         Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                         power-saving mode.
                                         Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  23) minutes.

SMART Attributes Data Structure revision number: 11
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE     WHEN_FAILED 
RAW_VALUE
  1 Raw_Read_Error_Rate     0x0029   100   253   020    Old_age      -       0
  3 Spin_Up_Time            0x0027   073   070   020    Old_age      -       
3476
  4 Start_Stop_Count        0x0032   100   100   008    Old_age      -       444
  5 Reallocated_Sector_Ct   0x0033   100   100   020    Old_age      -       0
  7 Seek_Error_Rate         0x000b   100   100   023    Old_age      -       0
  9 Power_On_Hours          0x0012   100   100   001    Old_age      -       210
 10 Spin_Retry_Count        0x0026   100   100   000    Old_age      -       0
 11 Calibration_Retry_Count 0x0013   100   100   020    Old_age      -       0
 12 Power_Cycle_Count       0x0032   100   100   008    Old_age      -       417
 13 Read_Soft_Error_Rate    0x000b   100   100   023    Old_age      -       0
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age      -       
2061
196 Reallocated_Event_Count 0x0010   100   253   020    Old_age      -       0
197 Current_Pending_Sector  0x0032   100   100   020    Old_age      -       0
198 Offline_Uncorrectable   0x0010   100   253   000    Old_age      -       0
199 UDMA_CRC_Error_Count    0x001a   196   196   000    Old_age      -       10

Error SMART Error Log Read failed: Input/output error
Smartctl: SMART Errorlog Read Failed
Error SMART Error Self-Test Log Read failed: Input/output error
Smartctl: SMART Self Test Log Read Failed
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Smartmontools-database mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to