found on smartmontools-support.
Thus line 156 of knowdrives.cpp should be:
"^QUANTUM FIREBALLP LM(10.2|15|20.4|30)$",
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: QUANTUM FIREBALLP LM20.4
Serial Number: 184016850212
Firmware Version: A35.0700
User Capacity: 20,416,757,760 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Sat Nov 11 21:45:04 2006 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 16) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 46) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 17) minutes.
SMART Attributes Data Structure revision number: 11
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0029 100 100 020 Pre-fail Offline
- 0
3 Spin_Up_Time 0x0027 066 063 020 Pre-fail Always
- 4355
4 Start_Stop_Count 0x0032 100 100 008 Old_age Always
- 446
5 Reallocated_Sector_Ct 0x0033 100 100 020 Pre-fail Always
- 1
7 Seek_Error_Rate 0x000b 100 093 023 Pre-fail Always
- 0
9 Power_On_Hours 0x0012 040 040 001 Old_age Always
- 39657
10 Spin_Retry_Count 0x0026 100 100 020 Old_age Always
- 0
11 Calibration_Retry_Count 0x0013 100 100 020 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 008 Old_age Always
- 434
13 Read_Soft_Error_Rate 0x000b 100 100 023 Pre-fail Always
- 0
199 UDMA_CRC_Error_Count 0x001a 001 001 000 Old_age Always
- 452
196 Reallocated_Event_Count 0x0010 100 100 020 Old_age Offline
- 0
197 Current_Pending_Sector 0x0032 100 100 020 Old_age Always
- 1
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
SMART Error Log Version: 1
ATA Error Count: 3
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3 occurred at disk power-on lifetime: 29708 hours (1237 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 d1 08 4f ff 01 e0 Error: UNC 8 sectors at LBA = 0x0001ff4f = 130895
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 4f ff 01 e0 00 00:01:36.620 READ DMA
c8 d8 08 4f ff 01 e0 00 00:01:32.107 READ DMA
c8 d8 08 3f ff 01 e0 00 00:01:32.106 READ DMA
c8 d8 08 37 ff 01 e0 00 00:01:32.106 READ DMA
c8 d8 08 1f ff 01 e0 00 00:01:32.106 READ DMA
Error 2 occurred at disk power-on lifetime: 29708 hours (1237 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 d1 08 4f ff 01 e0 Error: UNC 8 sectors at LBA = 0x0001ff4f = 130895
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 4f ff 01 e0 00 00:01:32.107 READ DMA
c8 d8 08 3f ff 01 e0 00 00:01:32.106 READ DMA
c8 d8 08 37 ff 01 e0 00 00:01:32.106 READ DMA
c8 d8 08 1f ff 01 e0 00 00:01:32.106 READ DMA
c8 d8 08 0f ff 01 e0 00 00:01:32.105 READ DMA
Error 1 occurred at disk power-on lifetime: 17837 hours (743 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
61 f0 05 f0 b0 d1 e1 Device Fault 5 sectors at LBA = 0x01d1b0f0 = 30519536
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 05 f0 b0 d1 e1 00 49d+16:58:09.930 READ DMA
c8 00 08 70 b0 d1 e1 00 49d+16:58:09.905 READ DMA
ca 00 80 90 fc 9b e0 00 49d+16:58:09.903 WRITE DMA
c8 00 08 10 fe 9b e0 00 49d+16:58:09.903 READ DMA
ca 00 60 b0 02 7b e0 00 49d+16:58:09.901 WRITE DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Aborted by host 00% 39373 -
# 2 Extended offline Completed without error 00% 39360 -
# 3 Extended offline Completed without error 00% 39303 -
# 4 Extended offline Completed without error 00% 39295 -
# 5 Short offline Completed without error 00% 39284 -
# 6 Offline Aborted by host 80% 39227 -
# 7 Short offline Completed without error 00% 39219 -
# 8 Short offline Completed without error 00% 39219 -
# 9 Extended offline Completed without error 00% 39203 -
#10 Short offline Completed without error 00% 1 -
#11 Extended offline Completed without error 00% 0 -
#12 Short offline Completed without error 00% 0 -
Device does not support Selective Self Tests/Logging
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Smartmontools-database mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
