Dear maintainers of the database and smartmontools, First of all, my gratitude for your work and contribution to the FOSS.
Attached the data for a Toshiba STOR.E Canvio 3TB 3.5" Desktop disk. All the best, -- -- In good times, generosity and consciousness. -- In bad times, even more consciousness and generosity. -- [--------------------------------------------------------------------] [ Prof. Andrés Augusto Nogueiras Meléndez ] [ Electronic Technology Department University of Vigo ] [ Campus Lagoas Marcosende, 9 http://www.dte.uvigo.es/ ] [ 36310 - Vigo, Pontevedra Spain ] [--------------------------------------------------------------------]
Report of Toshiba Stor.E Canvio 3.5" Desktop P/N HDWC130EK3J1
earth:~ # smartctl -d sat -t short -x /dev/sdb1
smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.4.47-2.38-desktop] (SUSE RPM)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line
mode".
Drive command "Execute SMART Short self-test routine immediately in off-line
mode" successful.
Testing has begun.
Please wait 1 minutes for test to complete.
Test will complete after Sat Jul 27 14:16:45 2013
Use smartctl -X to abort test.
earth:~ # :~ # smartctl -d sat -q noserial -x /dev/sdb1
smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.4.47-2.38-desktop] (SUSE RPM)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA DT01ABA300
Firmware Version: MZ6OABB0
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5940 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Jul 27 14:23:25 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 1 (minimum power consumption with standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
=== START OF READ SMART DATA SECTION ===
SMART STATUS RETURN: incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (27493) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 459) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 100 100 054 - 0
3 Spin_Up_Time POS--- 100 100 024 - 323
4 Start_Stop_Count -O--C- 100 100 000 - 9
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 020 - 0
9 Power_On_Hours -O--C- 100 100 000 - 1
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 9
192 Power-Off_Retract_Count -O--CK 100 100 000 - 17
193 Load_Cycle_Count -O--C- 100 100 000 - 17
194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 23/36)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log]
GP Log at address 0x04 has 7 sectors [Device Statistics log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
GP Log at address 0x08 has 2 sectors [Power Conditions log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error log]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP Log at address 0x20 has 1 sectors [Streaming performance log]
GP Log at address 0x21 has 1 sectors [Write stream error log]
GP Log at address 0x22 has 1 sectors [Read stream error log]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: 34/36 Celsius
Lifetime Min/Max Temperature: 23/36 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (63)
Index Estimated Time Temperature Celsius
64 2013-07-27 12:16 ? -
... ..( 62 skipped). .. -
127 2013-07-27 13:19 ? -
0 2013-07-27 13:20 24 *****
1 2013-07-27 13:21 ? -
2 2013-07-27 13:22 24 *****
3 2013-07-27 13:23 25 ******
4 2013-07-27 13:24 ? -
5 2013-07-27 13:25 28 *********
6 2013-07-27 13:26 28 *********
7 2013-07-27 13:27 28 *********
8 2013-07-27 13:28 29 **********
9 2013-07-27 13:29 29 **********
10 2013-07-27 13:30 30 ***********
... ..( 3 skipped). .. ***********
14 2013-07-27 13:34 30 ***********
15 2013-07-27 13:35 31 ************
... ..( 3 skipped). .. ************
19 2013-07-27 13:39 31 ************
20 2013-07-27 13:40 32 *************
... ..( 2 skipped). .. *************
23 2013-07-27 13:43 32 *************
24 2013-07-27 13:44 33 **************
... ..( 2 skipped). .. **************
27 2013-07-27 13:47 33 **************
28 2013-07-27 13:48 34 ***************
29 2013-07-27 13:49 ? -
30 2013-07-27 13:50 27 ********
31 2013-07-27 13:51 27 ********
32 2013-07-27 13:52 28 *********
33 2013-07-27 13:53 28 *********
34 2013-07-27 13:54 29 **********
35 2013-07-27 13:55 29 **********
36 2013-07-27 13:56 30 ***********
37 2013-07-27 13:57 30 ***********
38 2013-07-27 13:58 31 ************
39 2013-07-27 13:59 31 ************
40 2013-07-27 14:00 31 ************
41 2013-07-27 14:01 32 *************
42 2013-07-27 14:02 32 *************
43 2013-07-27 14:03 33 **************
44 2013-07-27 14:04 33 **************
45 2013-07-27 14:05 33 **************
46 2013-07-27 14:06 34 ***************
47 2013-07-27 14:07 ? -
48 2013-07-27 14:08 34 ***************
... ..( 5 skipped). .. ***************
54 2013-07-27 14:14 34 ***************
55 2013-07-27 14:15 35 ****************
... ..( 2 skipped). .. ****************
58 2013-07-27 14:18 35 ****************
59 2013-07-27 14:19 36 *****************
... ..( 3 skipped). .. *****************
63 2013-07-27 14:23 36 *****************
SMART WRITE LOG does not return COUNT and LBA_LOW register
SCT (Get) Error Recovery Control command failed
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 1) ==
1 0x008 4 9 Lifetime Power-On Resets
1 0x010 4 1 Power-on Hours
1 0x018 6 66916968 Logical Sectors Written
1 0x020 6 281944 Number of Write Commands
1 0x028 6 1277184 Logical Sectors Read
1 0x030 6 10913 Number of Read Commands
3 ===== = = == Rotating Media Statistics (rev 1) ==
3 0x008 4 0 Spindle Motor Power-on Hours
3 0x010 4 0 Head Flying Hours
3 0x018 4 17 Head Load Events
3 0x020 4 0 Number of Reallocated Logical Sectors
3 0x028 4 0 Read Recovery Attempts
3 0x030 4 21 Number of Mechanical Start Failures
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 0 Number of Reported Uncorrectable Errors
4 0x010 4 0 Resets Between Cmd Acceptance and Completion
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 36 Current Temperature
5 0x010 1 -~ Average Short Term Temperature
5 0x018 1 -~ Average Long Term Temperature
5 0x020 1 36 Highest Temperature
5 0x028 1 23 Lowest Temperature
5 0x030 1 -~ Highest Average Short Term Temperature
5 0x038 1 -~ Lowest Average Short Term Temperature
5 0x040 1 -~ Highest Average Long Term Temperature
5 0x048 1 -~ Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 60 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 0 Specified Minimum Operating Temperature
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 68 Number of Hardware Resets
6 0x010 4 5 Number of ASR Events
6 0x018 4 0 Number of Interface CRC Errors
|_ ~ normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 16 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
smime.p7s
Description: Firma criptográfica S/MIME
------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________ Smartmontools-database mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-database
