I'm attaching the output of my Seagate FreeAgent GoFlex 1,5 TB USB drive. Internally the Device Model is called ST1500LM003-9YH148.
Output of smartctl -q noserial -x /dev/sdc -- Hanno Böck http://hboeck.de/ mail/jabber: [email protected] GPG: BBB51E42
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11.0] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST1500LM003-9YH148
Firmware Version: CC94
User Capacity: 1,500,301,910,016 bytes [1.50 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Wed Oct 9 10:33:52 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 208
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) XXX Error Recovery Control Command failed: scsi error medium or
hardware error (serious)
Wt Cache Reorder: N/A
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 656) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 379) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 127 099 006 - 1414038392
3 Spin_Up_Time PO---- 095 094 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1365
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 065 060 030 - 3382382
9 Power_On_Hours -O--CK 100 100 000 - 218
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 576
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 077 049 045 - 23 (Min/Max 15/23)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 158
193 Load_Cycle_Count -O--CK 100 100 000 - 1124
194 Temperature_Celsius -O---K 023 051 000 - 23 (0 10 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 127 099 000 - 1414038392
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 89936615178560
241 Total_LBAs_Written ------ 100 253 000 - 1483734490
242 Total_LBAs_Read ------ 100 253 000 - 1998389255
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 20 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 5067 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 218 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 23 Celsius
Power Cycle Min/Max Temperature: 15/23 Celsius
Lifetime Min/Max Temperature: 10/51 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (32)
Index Estimated Time Temperature Celsius
33 2013-10-04 04:48 ? -
34 2013-10-04 05:47 17 -
35 2013-10-04 06:46 17 -
36 2013-10-04 07:45 ? -
37 2013-10-04 08:44 17 -
38 2013-10-04 09:43 ? -
39 2013-10-04 10:42 20 *
40 2013-10-04 11:41 ? -
41 2013-10-04 12:40 18 -
42 2013-10-04 13:39 ? -
43 2013-10-04 14:38 18 -
44 2013-10-04 15:37 ? -
45 2013-10-04 16:36 18 -
46 2013-10-04 17:35 ? -
47 2013-10-04 18:34 20 *
48 2013-10-04 19:33 20 *
49 2013-10-04 20:32 40 *********************
50 2013-10-04 21:31 ? -
51 2013-10-04 22:30 16 -
52 2013-10-04 23:29 ? -
53 2013-10-05 00:28 18 -
54 2013-10-05 01:27 ? -
55 2013-10-05 02:26 18 -
56 2013-10-05 03:25 ? -
57 2013-10-05 04:24 20 *
58 2013-10-05 05:23 ? -
59 2013-10-05 06:22 20 *
60 2013-10-05 07:21 ? -
61 2013-10-05 08:20 20 *
62 2013-10-05 09:19 ? -
63 2013-10-05 10:18 20 *
64 2013-10-05 11:17 ? -
65 2013-10-05 12:16 21 **
66 2013-10-05 13:15 ? -
67 2013-10-05 14:14 30 ***********
68 2013-10-05 15:13 ? -
69 2013-10-05 16:12 18 -
70 2013-10-05 17:11 ? -
71 2013-10-05 18:10 19 -
72 2013-10-05 19:09 ? -
73 2013-10-05 20:08 19 -
74 2013-10-05 21:07 ? -
75 2013-10-05 22:06 21 **
76 2013-10-05 23:05 ? -
77 2013-10-06 00:04 21 **
78 2013-10-06 01:03 ? -
79 2013-10-06 02:02 21 **
80 2013-10-06 03:01 ? -
81 2013-10-06 04:00 21 **
82 2013-10-06 04:59 ? -
83 2013-10-06 05:58 22 ***
84 2013-10-06 06:57 ? -
85 2013-10-06 07:56 24 *****
86 2013-10-06 08:55 ? -
87 2013-10-06 09:54 22 ***
88 2013-10-06 10:53 ? -
89 2013-10-06 11:52 25 ******
90 2013-10-06 12:51 ? -
91 2013-10-06 13:50 22 ***
92 2013-10-06 14:49 ? -
93 2013-10-06 15:48 24 *****
94 2013-10-06 16:47 ? -
95 2013-10-06 17:46 21 **
96 2013-10-06 18:45 ? -
97 2013-10-06 19:44 23 ****
98 2013-10-06 20:43 23 ****
99 2013-10-06 21:42 38 *******************
100 2013-10-06 22:41 ? -
101 2013-10-06 23:40 18 -
102 2013-10-07 00:39 18 -
103 2013-10-07 01:38 38 *******************
104 2013-10-07 02:37 39 ********************
105 2013-10-07 03:36 ? -
106 2013-10-07 04:35 19 -
107 2013-10-07 05:34 19 -
108 2013-10-07 06:33 31 ************
109 2013-10-07 07:32 ? -
110 2013-10-07 08:31 18 -
111 2013-10-07 09:30 ? -
112 2013-10-07 10:29 19 -
113 2013-10-07 11:28 ? -
114 2013-10-07 12:27 20 *
115 2013-10-07 13:26 20 *
116 2013-10-07 14:25 ? -
117 2013-10-07 15:24 19 -
118 2013-10-07 16:23 ? -
119 2013-10-07 17:22 18 -
120 2013-10-07 18:21 18 -
121 2013-10-07 19:20 ? -
122 2013-10-07 20:19 19 -
123 2013-10-07 21:18 ? -
124 2013-10-07 22:17 16 -
125 2013-10-07 23:16 ? -
126 2013-10-08 00:15 17 -
127 2013-10-08 01:14 ? -
0 2013-10-08 02:13 15 -
1 2013-10-08 03:12 ? -
2 2013-10-08 04:11 17 -
3 2013-10-08 05:10 ? -
4 2013-10-08 06:09 18 -
5 2013-10-08 07:08 ? -
6 2013-10-08 08:07 18 -
7 2013-10-08 09:06 ? -
8 2013-10-08 10:05 18 -
9 2013-10-08 11:04 ? -
10 2013-10-08 12:03 15 -
11 2013-10-08 13:02 ? -
12 2013-10-08 14:01 17 -
13 2013-10-08 15:00 ? -
14 2013-10-08 15:59 15 -
15 2013-10-08 16:58 15 -
16 2013-10-08 17:57 35 ****************
17 2013-10-08 18:56 37 ******************
18 2013-10-08 19:55 ? -
19 2013-10-08 20:54 16 -
20 2013-10-08 21:53 ? -
21 2013-10-08 22:52 17 -
22 2013-10-08 23:51 ? -
23 2013-10-09 00:50 14 -
24 2013-10-09 01:49 ? -
25 2013-10-09 02:48 18 -
26 2013-10-09 03:47 ? -
27 2013-10-09 04:46 19 -
28 2013-10-09 05:45 ? -
29 2013-10-09 06:44 21 **
30 2013-10-09 07:43 ? -
31 2013-10-09 08:42 15 -
32 2013-10-09 09:41 15 -
Write SCT (Get) Error Recovery Control Command failed: scsi error medium or
hardware error (serious)
SCT (Get) Error Recovery Control command failed
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
signature.asc
Description: PGP signature
------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60134071&iu=/4140/ostg.clktrk
_______________________________________________ Smartmontools-database mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-database
