Output of `smartctl -q noserial -x /dev/sda`.
Thanks for your work!
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.1.6-1-ARCH] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: CT500BX100SSD1
Firmware Version: MU02
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Sep 26 14:03:08 2015 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi
parameters
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
9 Power_On_Hours ------ 100 100 000 - 11
12 Power_Cycle_Count ------ 100 100 000 - 31
160 Unknown_Attribute ------ 100 100 000 - 0
161 Unknown_Attribute ------ 100 100 000 - 67
163 Unknown_Attribute ------ 100 100 000 - 24
164 Unknown_Attribute ------ 100 100 000 - 490
165 Unknown_Attribute ------ 100 100 000 - 0
166 Unknown_Attribute ------ 100 100 000 - 0
167 Unknown_Attribute ------ 100 100 000 - 0
168 Unknown_Attribute ------ 100 100 000 - 2000
169 Unknown_Attribute ------ 100 100 000 - 100
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
177 Wear_Leveling_Count ------ 100 100 000 - 0
178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
192 Power-Off_Retract_Count ------ 100 100 000 - 1
194 Temperature_Celsius ------ 100 100 000 - 35
195 Hardware_ECC_Recovered ------ 100 100 000 - 156
196 Reallocated_Event_Count ------ 100 100 000 - 0
197 Current_Pending_Sector ------ 100 100 000 - 0
198 Offline_Uncorrectable ------ 100 100 000 - 0
199 UDMA_CRC_Error_Count ------ 100 100 000 - 861
232 Available_Reservd_Space ------ 100 100 000 - 100
241 Total_LBAs_Written ------ 100 100 000 - 7643
242 Total_LBAs_Read ------ 100 100 000 - 6849
245 Unknown_Attribute ------ 100 100 000 - 7840
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 SATA NCQ Queued Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 64 Current Device Internal Status Data log
0x25 GPL R/O 64 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 11 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 0 Celsius
Power Cycle Min/Max Temperature: 20/35 Celsius
Lifetime Min/Max Temperature: 0/41 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 0 minutes
Min/Max recommended Temperature: 0/100 Celsius
Min/Max Temperature Limit: 0/100 Celsius
Temperature History Size (Index): 128 (55)
Index Estimated Time Temperature Celsius
56 2015-09-26 11:56 33 **************
57 2015-09-26 11:57 37 ******************
58 2015-09-26 11:58 37 ******************
59 2015-09-26 11:59 39 ********************
60 2015-09-26 12:00 29 **********
... ..( 2 skipped). .. **********
63 2015-09-26 12:03 29 **********
64 2015-09-26 12:04 30 ***********
65 2015-09-26 12:05 30 ***********
66 2015-09-26 12:06 31 ************
67 2015-09-26 12:07 31 ************
68 2015-09-26 12:08 32 *************
69 2015-09-26 12:09 20 *
... ..( 9 skipped). .. *
79 2015-09-26 12:19 20 *
80 2015-09-26 12:20 27 ********
81 2015-09-26 12:21 27 ********
82 2015-09-26 12:22 30 ***********
83 2015-09-26 12:23 22 ***
... ..( 9 skipped). .. ***
93 2015-09-26 12:33 22 ***
94 2015-09-26 12:34 31 ************
95 2015-09-26 12:35 31 ************
96 2015-09-26 12:36 34 ***************
97 2015-09-26 12:37 34 ***************
98 2015-09-26 12:38 33 **************
99 2015-09-26 12:39 33 **************
100 2015-09-26 12:40 38 *******************
101 2015-09-26 12:41 38 *******************
102 2015-09-26 12:42 37 ******************
103 2015-09-26 12:43 29 **********
... ..( 9 skipped). .. **********
113 2015-09-26 12:53 29 **********
114 2015-09-26 12:54 38 *******************
115 2015-09-26 12:55 38 *******************
116 2015-09-26 12:56 40 *********************
117 2015-09-26 12:57 40 *********************
118 2015-09-26 12:58 39 ********************
119 2015-09-26 12:59 20 *
... ..( 9 skipped). .. *
1 2015-09-26 13:09 20 *
2 2015-09-26 13:10 28 *********
3 2015-09-26 13:11 28 *********
4 2015-09-26 13:12 34 ***************
... ..( 23 skipped). .. ***************
28 2015-09-26 13:36 34 ***************
29 2015-09-26 13:37 35 ****************
... ..( 24 skipped). .. ****************
54 2015-09-26 14:02 35 ****************
55 2015-09-26 14:03 33 **************
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 31 --- Lifetime Power-On Resets
0x01 0x010 4 11 --- Power-on Hours
0x01 0x018 6 500933158 --- Logical Sectors Written
0x01 0x020 6 3106706 --- Number of Write Commands
0x01 0x028 6 448906983 --- Logical Sectors Read
0x01 0x030 6 3847479 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 1 --- Resets Between Cmd Acceptance and
Completion
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 1716 --- Number of Hardware Resets
0x06 0x018 4 861 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
