Greetings,
I've uploaded two HDD that were not in your database? When you add them to
your database, how long does that usually take and then what would I need
to do next?
I assume that updating the database gives more specific values to the
attributes list.
Thanks
DRC
smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7-sp1] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: INTEL SSDSA1NW160G3
Serial Number: CVPR3411000N160HGN
LU WWN Device Id: 5 5cd2e4 04b846ccb
Firmware Version: 4PC10362
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Oct 26 15:38:25 2015 CUT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: Read of ATA output registers
not implemented [JMicron]
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1) seconds.
Offline data collection
capabilities: (0x75) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0020 100 100 000 Old_age Offline
- 0
4 Start_Stop_Count 0x0030 100 100 000 Old_age Offline
- 0
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 270
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 222
170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always
- 0
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
183 Runtime_Bad_Block 0x0030 100 100 000 Old_age Offline
- 54
184 End-to-End_Error 0x0032 100 100 090 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 55
199 UDMA_CRC_Error_Count 0x0030 100 100 000 Old_age Offline
- 0
225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always
- 29163
226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always
- 21842318
227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always
- 0
228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always
- 42012522
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always
- 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always
- 0
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always
- 29163
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always
- 13687
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Vendor (0x68) Completed without error 00% 270 -
# 2 Vendor (0x68) Completed without error 00% 270 -
# 3 Vendor (0xa7) Completed without error 00% 269 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been
run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: ? Celsius
Power Cycle Min/Max Temperature: ?/ ? Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/0
Unexpected SCT status 0x0011 (action_code=5, function_code=1)
Read SCT Temperature History failed
smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7-sp1] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HGST HTS721050A9E630
Serial Number: JR14006Q0279RE
LU WWN Device Id: 5 000cca 7d8c10432
Firmware Version: JB6OA3J0
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Oct 26 15:33:25 2015 CUT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x05) Offline data collection activity
was aborted by an interrupting command
from host.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 101) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always
- 0
2 Throughput_Performance 0x0005 158 158 040 Pre-fail Offline
- 105
3 Spin_Up_Time 0x0007 158 158 033 Pre-fail Always
- 1
4 Start_Stop_Count 0x0012 097 097 000 Old_age Always
- 5334
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline
- 0
9 Power_On_Hours 0x0012 098 098 000 Old_age Always
- 882
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 173
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always
- 1
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 11
193 Load_Cycle_Count 0x0012 096 096 000 Old_age Always
- 41201
194 Temperature_Celsius 0x0002 193 193 000 Old_age Always
- 31 (Min/Max 18/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always
- 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 881 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 18/32 Celsius
Lifetime Min/Max Temperature: 18/48 Celsius
Lifetime Average Temperature: 30 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (39)
Index Estimated Time Temperature Celsius
40 2015-10-26 13:26 29 **********
41 2015-10-26 13:27 30 ***********
... ..( 14 skipped). .. ***********
56 2015-10-26 13:42 30 ***********
57 2015-10-26 13:43 29 **********
58 2015-10-26 13:44 30 ***********
... ..( 6 skipped). .. ***********
65 2015-10-26 13:51 30 ***********
66 2015-10-26 13:52 31 ************
... ..( 23 skipped). .. ************
90 2015-10-26 14:16 31 ************
91 2015-10-26 14:17 32 *************
... ..( 4 skipped). .. *************
96 2015-10-26 14:22 32 *************
97 2015-10-26 14:23 31 ************
98 2015-10-26 14:24 31 ************
99 2015-10-26 14:25 32 *************
... ..( 2 skipped). .. *************
102 2015-10-26 14:28 32 *************
103 2015-10-26 14:29 31 ************
104 2015-10-26 14:30 32 *************
105 2015-10-26 14:31 31 ************
... ..( 23 skipped). .. ************
1 2015-10-26 14:55 31 ************
2 2015-10-26 14:56 32 *************
3 2015-10-26 14:57 31 ************
4 2015-10-26 14:58 31 ************
5 2015-10-26 14:59 31 ************
6 2015-10-26 15:00 32 *************
... ..( 2 skipped). .. *************
9 2015-10-26 15:03 32 *************
10 2015-10-26 15:04 31 ************
11 2015-10-26 15:05 31 ************
12 2015-10-26 15:06 32 *************
13 2015-10-26 15:07 31 ************
... ..( 7 skipped). .. ************
21 2015-10-26 15:15 31 ************
22 2015-10-26 15:16 32 *************
23 2015-10-26 15:17 31 ************
... ..( 15 skipped). .. ************
39 2015-10-26 15:33 31 ************
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
