Hello,
I have a pair of Crucial SSDs, reported by Smart as type CT1000BX100SSD1.
I've attached a report as described at http://www.smartmontools.org/.
I hope this is useful.
--
Rgds
Peter
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.0.9-gentoo] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: CT1000BX100SSD1
Serial Number: 1504F0023864
LU WWN Device Id: 5 00a075 1f0023864
Firmware Version: MU02
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Oct 27 16:26:00 2015 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: scsi error aborted command
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
9 Power_On_Hours ------ 100 100 000 - 793
12 Power_Cycle_Count ------ 100 100 000 - 42
160 Unknown_Attribute ------ 100 100 000 - 0
161 Unknown_Attribute ------ 100 100 000 - 146
163 Unknown_Attribute ------ 100 100 000 - 53
164 Unknown_Attribute ------ 100 100 000 - 39323
165 Unknown_Attribute ------ 100 100 000 - 43
166 Unknown_Attribute ------ 100 100 000 - 0
167 Unknown_Attribute ------ 100 100 000 - 17
168 Unknown_Attribute ------ 100 100 000 - 2000
169 Unknown_Attribute ------ 100 100 000 - 100
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
177 Wear_Leveling_Count ------ 100 100 000 - 0
178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
192 Power-Off_Retract_Count ------ 100 100 000 - 25
194 Temperature_Celsius ------ 100 100 000 - 25
195 Hardware_ECC_Recovered ------ 100 100 000 - 751889
196 Reallocated_Event_Count ------ 100 100 000 - 0
197 Current_Pending_Sector ------ 100 100 000 - 0
198 Offline_Uncorrectable ------ 100 100 000 - 0
199 UDMA_CRC_Error_Count ------ 100 100 000 - 0
232 Available_Reservd_Space ------ 100 100 000 - 100
241 Total_LBAs_Written ------ 100 100 000 - 285837
242 Total_LBAs_Read ------ 100 100 000 - 152676
245 Unknown_Attribute ------ 100 100 000 - 629168
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 SATA NCQ Queued Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 64 Current Device Internal Status Data log
0x25 GPL R/O 64 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 0 Celsius
Power Cycle Min/Max Temperature: 23/27 Celsius
Lifetime Min/Max Temperature: 0/35 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 0 minutes
Min/Max recommended Temperature: 0/100 Celsius
Min/Max Temperature Limit: 0/100 Celsius
Temperature History Size (Index): 128 (122)
Index Estimated Time Temperature Celsius
123 2015-10-27 14:19 26 *******
... ..( 42 skipped). .. *******
38 2015-10-27 15:02 26 *******
39 2015-10-27 15:03 25 ******
... ..( 12 skipped). .. ******
52 2015-10-27 15:16 25 ******
53 2015-10-27 15:17 26 *******
... ..( 8 skipped). .. *******
62 2015-10-27 15:26 26 *******
63 2015-10-27 15:27 25 ******
... ..( 26 skipped). .. ******
90 2015-10-27 15:54 25 ******
91 2015-10-27 15:55 26 *******
... ..( 23 skipped). .. *******
115 2015-10-27 16:19 26 *******
116 2015-10-27 16:20 25 ******
... ..( 4 skipped). .. ******
121 2015-10-27 16:25 25 ******
122 2015-10-27 16:26 26 *******
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 42 --- Lifetime Power-On Resets
0x01 0x010 4 793 --- Power-on Hours
0x01 0x018 6 1552788707 --- Logical Sectors Written
0x01 0x020 6 202893048 --- Number of Write Commands
0x01 0x028 6 1415880204 --- Logical Sectors Read
0x01 0x030 6 165455857 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 25 --- Resets Between Cmd Acceptance and
Completion
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 4181 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 33 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
