On Wed, Nov 18, 2015 at 1:36 AM, Christian Franke
<[email protected]> wrote:
> kamaraju kusumanchi wrote:
>>
>> Running gsmartcontrol on a brand new Western Digital hard drive says
>> that SMART support is unavailable. The hard drive is placed in a Dual
>> Bay external hard drive docking station which is connected via a USB
>> cable to my computer. So my set up is
>>
>> hard drive -> docking station -> usb port of computer
>>
>>
>> gsmartcontrol output:
>>
>> smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
>> Copyright (C) 2002-14, Bruce Allen, Christian Franke,
>> www.smartmontools.org
>>
>> === START OF INFORMATION SECTION ===
>> Vendor: WDC WD10
>> Product: EZEX-00BN5A0
>> Revision: 0106
>> Compliance: SPC-4
>
>
> This is the SCSI view of the drive.
>
>> ...
>> Docking station info:
>> Sabrent USB 3.0 to SATA Dual Bay External Hard Drive Docking Station
>> for 2.5 or 3.5in HDD, SSD with Hard Drive Duplicator/Cloner Function
>> [4TB Support] (EC-HDD2)
>> http://www.amazon.com/gp/product/B00IKC14OG
>>
>> Computer info:
>> Dell Precision T3500
>>
>> OS info:
>> ...
>> % lsusb -v
>> Bus 002 Device 004: ID 152d:1561 JMicron Technology Corp. / JMicron
>> USA Technology Corp.
>> Device Descriptor:
>> ...
>> idVendor 0x152d JMicron Technology Corp. / JMicron USA
>> Technology Corp.
>> idProduct 0x1561
>> bcdDevice 1.06
>
>
> JMicron bridges may work with '-d usbjmicron' or '-d sat' option.
>
> Please provide 'smartctl -d ... -x ...' output as attachments.
>
> If '-d usbjmicron' works, try also '-d usbjmicron,x'.
>
Thanks for the reply. Sorry for the long delay in responding to this.
The drive seems to work with '-d sat' option but not with '-d
usbjmicron'. Attached please find the outputs of
smartctl -d sat -x /dev/sdf
smartctl -d usbjmicron -x /dev/sdf
raju
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue (SATA 6Gb/s)
Device Model: WDC WD10EZEX-00BN5A0
Serial Number: WD-WCC3F2XV82FT
LU WWN Device Id: 5 0014ee 261c6046b
Firmware Version: 01.01A01
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Dec 31 01:35:24 2015 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (10740) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0
3 Spin_Up_Time POS--K 100 253 021 - 0
4 Start_Stop_Count -O--CK 100 100 000 - 5
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 1
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 4
192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
193 Load_Cycle_Count -O--CK 200 200 000 - 4
194 Temperature_Celsius -O---K 112 111 000 - 31
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 23/31 Celsius
Lifetime Min/Max Temperature: 23/33 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (86)
Index Estimated Time Temperature Celsius
87 2015-12-30 17:38 ? -
... ..(390 skipped). .. -
0 2015-12-31 00:09 ? -
1 2015-12-31 00:10 24 *****
2 2015-12-31 00:11 ? -
3 2015-12-31 00:12 23 ****
4 2015-12-31 00:13 23 ****
5 2015-12-31 00:14 23 ****
6 2015-12-31 00:15 24 *****
7 2015-12-31 00:16 25 ******
8 2015-12-31 00:17 25 ******
9 2015-12-31 00:18 26 *******
10 2015-12-31 00:19 26 *******
11 2015-12-31 00:20 27 ********
12 2015-12-31 00:21 27 ********
13 2015-12-31 00:22 28 *********
14 2015-12-31 00:23 28 *********
15 2015-12-31 00:24 29 **********
... ..( 2 skipped). .. **********
18 2015-12-31 00:27 29 **********
19 2015-12-31 00:28 30 ***********
20 2015-12-31 00:29 30 ***********
21 2015-12-31 00:30 31 ************
... ..( 2 skipped). .. ************
24 2015-12-31 00:33 31 ************
25 2015-12-31 00:34 32 *************
... ..( 2 skipped). .. *************
28 2015-12-31 00:37 32 *************
29 2015-12-31 00:38 33 **************
... ..( 2 skipped). .. **************
32 2015-12-31 00:41 33 **************
33 2015-12-31 00:42 32 *************
... ..( 2 skipped). .. *************
36 2015-12-31 00:45 32 *************
37 2015-12-31 00:46 31 ************
... ..( 2 skipped). .. ************
40 2015-12-31 00:49 31 ************
41 2015-12-31 00:50 ? -
42 2015-12-31 00:51 31 ************
43 2015-12-31 00:52 30 ***********
... ..( 2 skipped). .. ***********
46 2015-12-31 00:55 30 ***********
47 2015-12-31 00:56 31 ************
48 2015-12-31 00:57 31 ************
49 2015-12-31 00:58 31 ************
50 2015-12-31 00:59 32 *************
51 2015-12-31 01:00 32 *************
52 2015-12-31 01:01 32 *************
53 2015-12-31 01:02 ? -
54 2015-12-31 01:03 23 ****
55 2015-12-31 01:04 23 ****
56 2015-12-31 01:05 24 *****
57 2015-12-31 01:06 24 *****
58 2015-12-31 01:07 25 ******
59 2015-12-31 01:08 25 ******
60 2015-12-31 01:09 26 *******
61 2015-12-31 01:10 26 *******
62 2015-12-31 01:11 27 ********
63 2015-12-31 01:12 28 *********
64 2015-12-31 01:13 28 *********
65 2015-12-31 01:14 ? -
66 2015-12-31 01:15 23 ****
67 2015-12-31 01:16 23 ****
68 2015-12-31 01:17 23 ****
69 2015-12-31 01:18 24 *****
70 2015-12-31 01:19 25 ******
71 2015-12-31 01:20 25 ******
72 2015-12-31 01:21 26 *******
73 2015-12-31 01:22 26 *******
74 2015-12-31 01:23 26 *******
75 2015-12-31 01:24 27 ********
76 2015-12-31 01:25 28 *********
77 2015-12-31 01:26 28 *********
78 2015-12-31 01:27 28 *********
79 2015-12-31 01:28 29 **********
80 2015-12-31 01:29 29 **********
81 2015-12-31 01:30 29 **********
82 2015-12-31 01:31 30 ***********
83 2015-12-31 01:32 30 ***********
84 2015-12-31 01:33 30 ***********
85 2015-12-31 01:34 31 ************
86 2015-12-31 01:35 31 ************
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 1233 Vendor specific
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
Smartctl open device: /dev/sdf [USB JMicron] failed: No device connected
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
