Attached via USB box to the router.
smartctl 6.5 2016-05-07 r4318 [armv7l-linux-4.4.28-rc1] (localbuild)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST320LT020-9YG142
Serial Number: W040F9NV
LU WWN Device Id: 5 000c50 038b9e62b
Firmware Version: 0001SDM1
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Oct 31 13:51:40 2016 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: Read of ATA output registers
not implemented [JMicron]
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 87) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 117 099 006 - 119116840
3 Spin_Up_Time PO---- 099 099 085 - 0
4 Start_Stop_Count -O--CK 097 097 020 - 4019
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 073 060 030 - 43170696770
9 Power_On_Hours -O--CK 092 092 000 - 7448
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 097 097 020 - 3769
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 097 000 - 255
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 063 045 045 Past 37 (Min/Max 28/42)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 340
192 Power-Off_Retract_Count -O--CK 100 100 000 - 145
193 Load_Cycle_Count -O--CK 091 091 000 - 19744
194 Temperature_Celsius -O---K 037 055 000 - 37 (0 4 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 046 039 000 - 119116840
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 7382 (232 190 0)
241 Total_LBAs_Written ------ 100 253 000 - 3369705725
242 Total_LBAs_Read ------ 100 253 000 - 1510187302
250 Read_Error_Retry_Rate ------ 001 001 000 - 39577
251 Unknown_Attribute ------ 001 001 000 - 90772
252 Unknown_Attribute ------ 001 001 000 - 32865
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not
implemented [JMicron]
Read GP Log Directory failed
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x09 SL R/W 1 Selective self-test log
0x80-0x9f SL R/W 16 Host vendor specific log
0xa1 SL VS 20 Device vendor specific log
0xa8 SL VS 65 Device vendor specific log
0xa9 SL VS 1 Device vendor specific log
0xe0 SL R/W 1 SCT Command/Status
0xe1 SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 7448 -
# 2 Extended offline Completed without error 00% 7441 -
# 3 Short offline Completed without error 00% 7437 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 37 Celsius
Power Cycle Min/Max Temperature: 28/42 Celsius
Lifetime Min/Max Temperature: 4/55 Celsius
Lifetime Average Temperature: 36 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 30 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (18)
Index Estimated Time Temperature Celsius
19 2016-10-28 22:00 36 *****************
... ..( 37 skipped). .. *****************
57 2016-10-29 17:00 36 *****************
58 2016-10-29 17:30 37 ******************
59 2016-10-29 18:00 37 ******************
60 2016-10-29 18:30 36 *****************
... ..( 8 skipped). .. *****************
69 2016-10-29 23:00 36 *****************
70 2016-10-29 23:30 35 ****************
... ..( 3 skipped). .. ****************
74 2016-10-30 01:30 35 ****************
75 2016-10-30 02:00 36 *****************
76 2016-10-30 02:30 36 *****************
77 2016-10-30 03:00 35 ****************
... ..( 10 skipped). .. ****************
88 2016-10-30 08:30 35 ****************
89 2016-10-30 09:00 36 *****************
... ..( 11 skipped). .. *****************
101 2016-10-30 15:00 36 *****************
102 2016-10-30 15:30 35 ****************
... ..( 19 skipped). .. ****************
122 2016-10-31 01:30 35 ****************
123 2016-10-31 02:00 36 *****************
... ..( 6 skipped). .. *****************
2 2016-10-31 05:30 36 *****************
3 2016-10-31 06:00 42 ***********************
4 2016-10-31 06:30 42 ***********************
5 2016-10-31 07:00 40 *********************
6 2016-10-31 07:30 36 *****************
7 2016-10-31 08:00 35 ****************
... ..( 4 skipped). .. ****************
12 2016-10-31 10:30 35 ****************
13 2016-10-31 11:00 36 *****************
14 2016-10-31 11:30 36 *****************
15 2016-10-31 12:00 35 ****************
16 2016-10-31 12:30 36 *****************
17 2016-10-31 13:00 36 *****************
18 2016-10-31 13:30 36 *****************
Write SCT (Get) Error Recovery Control Command failed: Read of ATA output
registers not implemented [JMicron]
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not
implemented [JMicron]
Read SATA Phy Event Counters failed
------------------------------------------------------------------------------
Developer Access Program for Intel Xeon Phi Processors
Access to Intel Xeon Phi processor-based developer platforms.
With one year of Intel Parallel Studio XE.
Training and support from Colfax.
Order your platform today. http://sdm.link/xeonphi
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
