Colin Payne wrote: > I am using a USB to mSATA SSD board “Pi-102” manufactured by Lycom > (http://www.lycom.com.tw/Pi-102.htm) > > The Pi-102's USB bridge chip is upd720231A manufactured by Renesas > (https://www.renesas.com/en-eu/products/usb-assp/upd720231a.html) > > I’m running Smartmontools on a Raspberry Pi 3, and when I run: > > $ sudo smartctl --all /dev/sda -s on > > …I expected to see a detailed report of the drive data, but instead I got: > > /dev/sda: Unknown USB bridge [0x045b:0x0229 (0x000)] > Please specify device type with the -d option.
Try '-d sat' option and report the result to smartmontools-database mailing list. If SAT works, we could later add this USB ID to drivedb.h. Then this option will be no longer needed for this bridge. Note that you could also add a local drive database entry. See section about '-B' option on smartctl man page. Thanks, Christian ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database