> So I guess the NIC wouldn't have provisioned correctly hence the timeout. Ah yes that will do it - I remember accidentally swapping the IP and gateway fields and getting a similar outcome.
- Dave > On 18 Jun 2015, at 12:25 PM, Ian Collins <[email protected]> wrote: > > Ian Collins wrote: >> David Finster wrote: >>>> "ip": "172.28.41.116", >>>> "netmask": "255.255.252.0", >>>> "gateway": "172.28.63.254”, >>> Based on that IP address/mask, isn’t the local reachable subnet limited to >>> 172.28.40.1-172.28.43.255, making the gateway unreachable? >> There was an error in the template it should have been a /19 subnet, not >> /22. This doesn't normally stop a zone provisioning. Even with the >> correct mask, install still times out. >> > > Problem resolved! Creating the zone without a NIC worked, as did adding the > NIC later. I then discovered the address was a duplicate... > > So I guess the NIC wouldn't have provisioned correctly hence the timeout. > > -- > Ian. > > > > ------------------------------------------- > smartos-discuss > Archives: https://www.listbox.com/member/archive/184463/=now > RSS Feed: https://www.listbox.com/member/archive/rss/184463/25738179-216c4b5f > Modify Your Subscription: https://www.listbox.com/member/?&; > Powered by Listbox: http://www.listbox.com ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
