Hi Phillip, the probes should all see a different offset unless you specify the same offset explicitly. Are your slaves all running at the same time ?
for high load situtations it is essential to use speedy since startup time for smokeping is way too high with all the config file reading otherwhise ... cheers tobi Today Phillip Moore wrote: > > I'm having an issue where I have about 25 slaves each monitoring 24 > FPing targets reporting back to a single master. Things seem to work, > but the master becomes overwhelmed with smokeping.cgi processes and > load goes way up. I've tried setting it up with speedy, and despite > not working quite right, the load is still way too high. > > Has anyone done the master/slave setup at this size and had it work > ok? I don't see anyway to extend the time between reports or to make > sure they are randomized. > > Thanks, > > -pdm > > > > > > > _______________________________________________ > smokeping-users mailing list > [email protected] > https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users > > -- Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten http://it.oetiker.ch [EMAIL PROTECTED] ++41 62 213 9902 _______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
