Hello! I'm struggling with my Master/Slave-Setup and i believe after skimming through the mailinglist i've straightened out all syntax-errors. On the Master-Machine the Slave-config looks like this(slavesecrets mode 400, ownership www-data:www-data):
*** Slaves *** # ## make sure this is not world-readable! secrets=/etc/smokeping/slavesecrets.conf # +slave1 display_name=location-of-host.in.mydomain.at location=wien color=0000ff ++override Probes.FPing.binary = /usr/bin/fping I've also added the line "slaves=slave1" to some targets in the Targets-Section, the /etc/smokeping/slavesecrets.conf(mode 400, ownership www-data:www-data) looks like this: slave1:testblasmoke71 On the slave-machine i start with this command: sudo -u www-data /usr/sbin/smokeping --master-url=http://$internal-master-ip/cgi-bin/smokeping.cgi --cache-dir=/var/smokeping/ --shared-secret=/var/smokeping/slavesecrets.conf --debug and promptly get the answer: WARNING: No secret found for slave location-of-host.in.mydomain.at Sent data to Server. Server said WARNING: No secret found for slave location-of-host.in.mydomain.at ERROR: we did not get config from the master. Maybe we are not configured as a slave for any of the targets on the master ? On the master, the apache-error.log says: smokeping.cgi [client $client-internal-ip]: Use of uninitialized value in string eq at /usr/share/perl5/smokeping/Smokeping/Master.pm line 233. Looks like the client doesn't send a secret - but where is the problem? Is there a syntax-error or a permission problem(Allthough i've tried several options, smokeping usually complains when the permissions fail)? regards Christian -- Christian Benke InQnet GmbH Praterstraße 31 A-1020 Wien Tel.: +43 1 212 7650 524 Fax.: +43 1 212 7650 610 _______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
