Hi David, having the option to configure the --lower-limit and the --upper-limit in the config should not be that difficult todo ...
cheers tobi > A long time ago tobi wrote: > > > nope this is not possible at the moment ... > > > > I implemented it that way, because on a link with 250ms I do not > > usually care about tiny fluctuations ... can you explain about the > > need for this ? > > > > cheers > > tobi > > Hi tobi, > > I realise that this thread is a bit old by now, but this is a feature > that I'd REALLY like to have as well. > > My particular reason for wanting it is because of the multi-target > graphs that we've been able to use now since v2.2 was released. > > For example: I've got a graph with a bunch of servers hosted in Europe > that are all between 300-400ms [I'm in Australia, so that's a loooooong > way away ;)], but the actual difference between the individual servers > is typically only 20-30 ms between each host. > > What that means is that I end up with a graph that has a huge empty > space at the bottom - between 0-300ms - and then half a dozen graphs > squeezed into the few pixels between 300-400ms. > > The obvious side-effect of all that is that it becomes virtually > impossible to see the individual hosts properly. > > Here's an example of exactly what I'm talking about - > http://einstein.dontexist.net/smokeping/International/EU_mini.png > > However, if I had the option of starting the y-axis off at [say] 250ms, > that would make everything much, MUCH easier to distinguish, because > obviously all the hosts wouldn't be so compacted together. > > Ideally, I'd really love for this to be something that could be set in > the config options of each host/graph. > > IE - Something along the lines of: > > ++ myhost1 > host = myhost1.example > y-axis = 250 > > I'd really love to hear your thoughts on this ... and whether it's > something that might possibly be considered for a future release at some > point in time? > > Regards, > > --David Tomic > > -- Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland http://it.oetiker.ch [EMAIL PROTECTED] ++41 62 775 9902 / sb: -9900 _______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
