Hi What is your snmp (rw) community for IP SLA MIB on RouterA? Is it "community" ?
Here is what I'm using. ++++ Office1 menu = Office1 title = City 1 probe = CiscoRTTMonTcpConnect # if the default probe is something else host=10.174.200.4 # DB server at Office1 ioshost= [email protected] # private is my snmp write community iosint = 10.174.200.161 # Using ip address from Lan-interface of the router port = 2025 pings = 3 tos = 160 RuneT ----- Original Message ----- From: "Stokkenes Vidar" <[email protected]> To: <[email protected]> Sent: Monday, February 01, 2010 3:00 PM Subject: [smokeping-users] CiscoRTTMonTcpConnect difficulties with Cisco7200 VXR series > Hello folks, > > I seem to be having problems with doing RTT checks via SNMP using a Cisco > 7204 VXR router as the probe device. We are currently running Smokeping > v2.004002 on the server. > > Here is a sample of my config: > > Global probe config: > > + CiscoRTTMonTcpConnect > > forks = 5 > offset = 50% > step = 300 > timeout = 60 > > Host config: > > ++++++ LocationAtoB > menu = LocationAtoB > title = Roundtrip from Location A to Location B > probe = CiscoRTTMonTcpConnect > host = routerB.domain.com > port = 22 > ioshost = [email protected] > > But my logfile says the following: > > Feb 1 14:28:16 server smokeping[9574]: SNMP Error: Received SNMP response > with error code error status: commitFailed index 1 (OID: > 1.3.6.1.4.1.9.9.42.1.2.1.1.9.9574) SNMPv2c_Session (remote host: > "routerB.domain.com" [192.168.10.1].161) community: > "community" request ID: 1390275956 PDU > bufsize: 8000 bytes timeout: 2s > retries: 5 backoff: 1) at > /usr/lib/smokeping/SNMP_util.pm line 786 > > According to the Cisco 7200 documentation it should support the > CISCO-RTTMON-MIB, but maybe the answer smokeping gets from the router is > considered as "rubbish" (as the logfile implies) Also, when I ssh from the > CLI from routerA to routerB it works without a problem. All the graphs > with this probe is empty. I am doing the same against a Cisco Catalyst > 6500 with no problems at all. > > Can someone please tell me why this won't work? > > > Best regards, > > Vidar S > > > > _______________________________________________ > smokeping-users mailing list > [email protected] > https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users > _______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
