I'm trying to configure SmokePing to plot IPvt4 and IPv6 response times. I have a default install of SmokePing on Ubuntu server.
The IPv4 part is working fine. Here's what I've done so far. FPing6 to the Probes file, see below for file contents. Tested FPing6 ::1 from a commend line. Received a response of ::1 is alive (So I'm thinking this part is working.) I then modified the Targets file adding the IPv6 section, + LocalIPv6. This created the graph, but no data. But then I was thinking what activates the FPing6 so I added it as a probe at towards the top of the Targets file. (Contents of Targets file is below.) Now when I restart SmokePing I'm getting an error the probe variable already exists. What am I doing wrong? Do I need multiple Targets files, one for each probe? If so where do I declare the name of each Targets file? Would appreciate any assistance. Thanks, Doug Spindler *** Probes *** + FPing binary = /usr/bin/fping + FPing6 binary = /usr/bin/fping6 *** Targets *** probe = FPing probe = FPing6 menu = Top title = Network Latency Grapher remark = Welcome to the SmokePing website of xxx Company. \ Here you will learn all about the latency of our network. + Local menu = Local title = Local Area Network #parents = owner:/Test/James location:/ ++ LocalMachine menu = Local Machine title = This host host = localhost #alerts = someloss + LocalIPv6 menu = Local IPv6 title = Local IPv6 Test::1 host = ::1 + LocalIPv4 menu = Local IPv4 title = Local IPv4 Test 127.0.0.1 host = 127.0.0.1
_______________________________________________ smokeping-users mailing list smokeping-users@lists.oetiker.ch https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users