Smokepingers, I have fewer cycles available for working on this than I'd like to, BUT there is progress. The code on
https://github.com/oetiker/smokeping-3.x is now able to read smokeping config files and it can show smokeping configuration documentation on its built in webserver. It is nowhere near finished, but at least some working code :-) if you want to play with it, make sure you have at least perl 5.10 installed on your system. git clone https://github.com/oetiker/smokeping-3.x cd smokeping-3.x ./setup/build-thirdparty.sh /scratch/sp3-test/thirdparty ./configure --prefix=/scratch/sp3-test make install then get configuration in place (you can try your 2.x config file) cd /scratch/sp3-test/etc mv smokeping.cfg.dist smokeping.cfg now run it cd /scratch/sp3-test/bin ./smokeping.pl daemon and you can access the built in documentation browser: http://localhost:3000/doc there is much more to come ... cheers tobi -- Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland http://it.oetiker.ch t...@oetiker.ch ++41 62 775 9902 / sb: -9900 _______________________________________________ smokeping-users mailing list smokeping-users@lists.oetiker.ch https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users