Today sos...@126.com wrote: > Hi Tobi > > >you just create sub-probes ... > > In this case ,if I want the slave to use "FPingA". Should I > define "sub-probes " in the config file on master or on slave?
the slave sees the same probe config as the server there is no provision in the software to have separate probe configs for the slave. cheers tobi > > > > > sos...@126.com > > From: Tobias Oetiker > Date: 2013-11-19 16:33 > To: Parke > CC: smokeping-users > Subject: Re: [smokeping-users] FPing probe with multiple source addresses? > Hi Parke, > > Yesterday Parke wrote: > > > Hi, > > > > Is it possible to configure two (or more) "instances" of the FPing > > probe? I want FPing to be able to use different source addresses, on > > a per Target basis. > > sure, it certainly is ... > > > > *** Probes *** > > + FPing > > binary = /usr/sbin/fping > > ++ FPingA > > some_config=xxx > > ++ FPingB > > some_config=yyyy > > > > cheers > tobi > > > > > > Thanks! > > > > -Parke > > > > _______________________________________________ > > smokeping-users mailing list > > smokeping-users@lists.oetiker.ch > > https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users > > > > > > -- Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland http://it.oetiker.ch t...@oetiker.ch ++41 62 775 9902 / sb: -9900 _______________________________________________ smokeping-users mailing list smokeping-users@lists.oetiker.ch https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users