Also, it looks like the version I have running is actually the latest, I assumed it would output the version as 2.6.9. Sorry
On Tue, Mar 4, 2014 at 3:29 PM, Brett Bronson <brett.bron...@bigblockla.com>wrote: > Okay, it looks like I was actually using an older version of smokeping. > I've removed it and installed the latest version on the site and my config > is as follows: > http://pastebin.com/ZsLE8uCp > > Before, I was able to get smokeping to work fine up until I added the > section: > > + nodes > menu = Render Node Latency > title = Render Node Latency (ICMP Pings) > > ++ larender001a > host = larender001a > ++ larender001b > host = larender001b > ++ larender001c > host = larender001c > ++ larender001d > host = larender001d > > ++ larender002a > host = larender002a > ++ larender002b > host = larender002b > ++ larender002c > host = larender002c > ++ larender002d > host = larender002d > > > > Now that I look at the logs, it looks like it's still using the old > version.... > [ ... ] > Tue Mar 4 15:03:05 2014 - FPing: probing 5 targets with step 300 s and > offset 116 s. > Tue Mar 4 15:16:01 2014 - Smokeping version 2.006009 successfully > launched. > Tue Mar 4 15:16:01 2014 - Not entering multiprocess mode for just a > single probe. > Tue Mar 4 15:16:01 2014 - FPing: probing 13 targets with step 300 s and > offset 163 s. > Tue Mar 4 15:25:59 2014 - Smokeping version 2.006009 successfully > launched. > Tue Mar 4 15:25:59 2014 - Not entering multiprocess mode for just a > single probe. > Tue Mar 4 15:25:59 2014 - FPing: probing 13 targets with step 300 s and > offset 159 s. > > Before, I used sudo apt-get install smokeping to install, but I later > removed it using sudo apt-get remove smokeping; however, it looks like it > didn't remove the old version? Any idea how I could resolve this so that it > loads up the newer version? > > > > > > On Tue, Mar 4, 2014 at 2:28 PM, Gregory Sloop <gr...@sloop.net> wrote: > >> I don't see a database section, so I assume it's somewhere else. >> [Nothing looks obviously wrong - but that was just a quick glance.] >> >> But when you first start SP after adding a bunch of targets, it's going >> to have to allocate/create the RRD for each of the targets. >> [Also, are there slaves, because it will create X * 60 new RRD's - where >> X is how many slave SP instances you have. (In addition to the master >> RRD's) ] >> >> I wouldn't think that would take 10m, but I can't see how much data >> you're stuffing in each RRD, or if you have slaves, which might help >> explain it. >> >> As to why web-pages won't work, I'm not sure. Have you looked at the >> apache logs to see what they say? Or run SP in debug mode? [smokeping >> --debug >> IIRC] >> >> -Greg >> >> >> Hello, >> >> I recently updated my smokeping Target configuration to include about 60 >> of our machines in our render farm and noticed that restarting the >> smokeping service took about 10 minutes, and now our webpage will not load. >> >> Any ideas? >> >> My config: >> http://pastebin.com/ibNmGhAF >> >> >> -- >> Brett Bronson >> Big Block | Pipeline TD >> http://www.bigblockla.com >> [m] 805-338-6520 >> >> >> > > > -- > Brett Bronson > Big Block | Pipeline TD > http://www.bigblockla.com > [m] 805-338-6520 > > -- Brett Bronson Big Block | Pipeline TD http://www.bigblockla.com [m] 805-338-6520
_______________________________________________ smokeping-users mailing list smokeping-users@lists.oetiker.ch https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users