Excellent, glad it's now working. Cheers, -- Kwame
On Tue, Mar 11, 2014 at 1:22 PM, Erlington Cardoza <erlingto...@gmail.com>wrote: > Alert "someloss": no match for target /var/lib/smokeping/Colom/Colom > > it was a RRD, so the conf was on Target section. I commented. > > Also I saw this part: > > FPing: Got fping output: '/usr/bin/fping: cannot bind source address : > Cannot assign requested address > > > I realize mi source IP was being natted, so I change it and It works!!!. > Thanks a lot > > > 2014-03-11 20:02 GMT+01:00 Kwame Bahena <informa...@gmail.com>: > > Here's the error: >> >> Alert "someloss": no match for target /var/lib/smokeping/Colom/Colom >> >> Check that file >> >> Also, when you reply please use "reply all" so the mailing list has all >> the updates for this thread. >> >> >> On Tue, Mar 11, 2014 at 12:59 PM, Erlington Cardoza < >> erlingto...@gmail.com> wrote: >> >>> after all the calculations it says, >>> >>> Smokeping version 2.006008 successfully launched. >>> Not entering multiprocess mode with '--debug'. Use '--debug-daemon' for >>> that. >>> FPing: probing 2 targets with step 300 s and offset 26 s. >>> FPing: Executing /usr/bin/fping -C 21 -q -B1 -r1 -b5000 -t5000 -i1 >>> -p1500 -S192.168.1.200 -O0x20 192.168.1.101 localhost >>> FPing: Got fping output: '/usr/bin/fping: cannot bind source address : >>> Cannot assign requested address' >>> Calling RRDs::update(/var/lib/smokeping/Luminet/LocalMachine.rrd >>> --template >>> uptime:loss:median:ping1:ping2:ping3:ping4:ping5:ping6:ping7:ping8:ping9:ping10:ping11:ping12:ping13:ping14:ping15:ping16:ping17:ping18:ping19:ping20 >>> 1394564045:U:20:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U) >>> Alert "someloss": no match for target >>> /var/lib/smokeping/Luminet/LocalMachine >>> Calling RRDs::update(/var/lib/smokeping/Columbus/Columbus.rrd --template >>> uptime:loss:median:ping1:ping2:ping3:ping4:ping5:ping6:ping7:ping8:ping9:ping10:ping11:ping12:ping13:ping14:ping15:ping16:ping17:ping18:ping19:ping20 >>> 1394564045:U:20:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U) >>> Alert "someloss": no match for target /var/lib/smokeping/Colom/Colom >>> >>> >>> >>> 2014-03-11 19:43 GMT+01:00 Kwame Bahena <informa...@gmail.com>: >>> >>> read the manual, >>>> >>>> it says --config=x Use a config file different from the default >>>> >>>> >>>> On Tue, Mar 11, 2014 at 12:42 PM, Erlington Cardoza < >>>> erlingto...@gmail.com> wrote: >>>> >>>>> >>>>> Option c is ambiguous (cache-dir, check, config) >>>>> Usage: >>>>> smokeping [ --email | --makepod | --version | --restart ] >>>>> >>>>> Options: >>>>> >>>>> --man[=x] Show the manpage for the program (or for probe x, if >>>>> specified) >>>>> >>>>> --help Help :-) >>>>> >>>>> --email Send SmokePing Agents to all Targets marked DYNAMIC >>>>> >>>>> --config=x Use a config file different from the default >>>>> >>>>> --check Just check the config file syntax, don't start the >>>>> daemon >>>>> >>>>> --makepod[=x] Create POD documentation on Config file (or for >>>>> probe x, if specified) >>>>> >>>>> --version Show SmokePing Version >>>>> >>>>> --debug Run Only once and do not Fork >>>>> >>>>> --debug-daemon Start the daemon with debugging enabled >>>>> >>>>> --restart Restart SmokePing >>>>> >>>>> --reload Reload configuration in the running process without >>>>> interrupting >>>>> any probes >>>>> >>>>> --nodaemon Do no daemonize the process (no fork) >>>>> >>>>> --filter=x Only measure entries which pass the filter x >>>>> >>>>> --logfile=x Append warnings to logfile x. >>>>> >>>>> --static[=x] Generates a static website in directory x. If x is >>>>> left out, >>>>> pagedir from the config is used. >>>>> >>>>> --nosleep For debugging you may want to run SmokePing without >>>>> sleep interval >>>>> >>>>> --gen-examples Generate the smokeping_examples document and >>>>> example config files >>>>> (to be used while building inside the smokeping >>>>> distribution) >>>>> With --check : check the syntax of the generated >>>>> examples. >>>>> >>>>> --master-url=s Run smokeping in slave mode. Attach to master for >>>>> config. >>>>> >>>>> --slave-name=s By default the slave will use whatever it thinks >>>>> its name >>>>> is, when talking to its master. In some cases you >>>>> may >>>>> probably want to override this. >>>>> >>>>> >>>>> --shared-secret=s File containing the shared secret for talking >>>>> to the server. >>>>> >>>>> --cache-dir=s Directory for temporary data storage when running >>>>> in slave mode. >>>>> >>>>> --pid-dir=s Directory for the PID file when running in slave mode. >>>>> (optional, defaults to --cache-dir) >>>>> >>>>> >>>>> >>>>> 2014-03-11 19:37 GMT+01:00 Kwame Bahena <informa...@gmail.com>: >>>>> >>>>> stop smokeping and run it from the console with >>>>>> >>>>>> smokeping -c /path/to/config_file --nodaemon --debug >>>>>> >>>>>> and see what errors you get >>>>>> >>>>>> >>>>>> On Tue, Mar 11, 2014 at 12:22 PM, Erlington Cardoza < >>>>>> erlingto...@gmail.com> wrote: >>>>>> >>>>>>> Ok let`s change the public IP into a private so is still the same >>>>>>> issue, At the beginning I thought it was an IP problem for security and >>>>>>> I >>>>>>> tested before but nothing changed. So here is the conf with private IP >>>>>>> as I >>>>>>> have right know. >>>>>>> *** General *** >>>>>>> >>>>>>> owner = Jade Fox >>>>>>> contact = f...@mail.cr >>>>>>> mailhost = mx.mail.cr >>>>>>> # NOTE: do not put the Image Cache below cgi-bin >>>>>>> # since all files under cgi-bin will be executed ... this is not >>>>>>> # good for images. >>>>>>> cgiurl = http://192.168.1.200/smokeping.cgi >>>>>>> # specify this to get syslog logging >>>>>>> syslogfacility = local0 >>>>>>> # each probe is now run in its own process >>>>>>> # disable this to revert to the old behaviour >>>>>>> # concurrentprobes = no >>>>>>> >>>>>>> @include /etc/smokeping/config.d/pathnames >>>>>>> >>>>>>> Regarding the other suggestion, I have this files: >>>>>>> root@Fox:/etc/smokeping/config.d# ls >>>>>>> Alerts General Presentation sendmail Targets >>>>>>> Database pathnames Probes Slaves >>>>>>> >>>>>>> In alerts I have values from smokeping webpage: >>>>>>> >>>>>>> +someloss >>>>>>> type = loss >>>>>>> # in percent >>>>>>> pattern = >0%,*12*,>0%,*12*,>0% >>>>>>> comment = loss 3 times in a row >>>>>>> >>>>>>> +lossdetect >>>>>>> type = loss >>>>>>> # in percent >>>>>>> pattern = ==0%,==0%,==0%,==0%,>20%,>20%,>20% >>>>>>> comment = suddenly there is packet loss >>>>>>> >>>>>>> +miniloss >>>>>>> type = loss >>>>>>> # in percent >>>>>>> pattern = >0%,*12*,>0%,*12*,>0% >>>>>>> comment = detected loss 3 times over the last two hours >>>>>>> >>>>>>> +rttdetect >>>>>>> type = rtt >>>>>>> # in milliseconds >>>>>>> pattern = <10,<10,<10,<10,<10,<100,>100,>100,>100 >>>>>>> comment = routing messed up again ? >>>>>>> >>>>>>> +rttbadstart >>>>>>> type = rtt >>>>>>> # in milliseconds >>>>>>> pattern = ==S,==U >>>>>>> comment = offline at startup >>>>>>> >>>>>>> In targets : >>>>>>> >>>>>>> *** Targets *** >>>>>>> >>>>>>> probe = FPing >>>>>>> menu = Top >>>>>>> title = Network Latency Grapher >>>>>>> remark = Welcome to the SmokePing website of xxx Company. \ >>>>>>> Here you will learn all about the latency of our network. >>>>>>> >>>>>>> + Luminet >>>>>>> >>>>>>> menu = Luminet >>>>>>> title = Local Network >>>>>>> alerts = someloss >>>>>>> >>>>>>> ++ LocalMachine >>>>>>> >>>>>>> menu = Local Machine >>>>>>> title = This host >>>>>>> host = localhost >>>>>>> alerts = someloss >>>>>>> >>>>>>> + Colom >>>>>>> menu = Colom >>>>>>> title = Colom >>>>>>> >>>>>>> ++Colom >>>>>>> title = ICMP Colom >>>>>>> host = 192.168.1.101 >>>>>>> alerts = someloss >>>>>>> >>>>>>> in Probes: >>>>>>> +FPing >>>>>>> >>>>>>> binary = /usr/bin/fping >>>>>>> >>>>>>> And that's all I have configured. >>>>>>> Regards >>>>>>> >>>>>>> >>>>>>> 2014-03-11 19:09 GMT+01:00 Kwame Bahena <informa...@gmail.com>: >>>>>>> >>>>>>> There is little help I can provide if you don't share all your >>>>>>>> config. >>>>>>>> You say that you replaced the values yet in the config you shared I >>>>>>>> see: >>>>>>>> >>>>>>>> cgiurl = http://my.domain/smokeping.cgi >>>>>>>> >>>>>>>> and also, that's not the only config file you need to work on, you >>>>>>>> also need to look in the files in /etc/smokeping/conf.d >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Tue, Mar 11, 2014 at 12:06 PM, Erlington Cardoza < >>>>>>>> erlingto...@gmail.com> wrote: >>>>>>>> >>>>>>>>> Yes, I replace the values in this email for security because it >>>>>>>>> has a public IP, if not I couldn`t see that my graph has not data... >>>>>>>>> >>>>>>>>> >>>>>>>>> 2014-03-11 19:03 GMT+01:00 Kwame Bahena <informa...@gmail.com>: >>>>>>>>> >>>>>>>>> But you need to replace your cgiurl value, is your "my.domain" >>>>>>>>>> really your domain? you need to know at least the ip of your server. >>>>>>>>>> Do you know the ip of it? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Tue, Mar 11, 2014 at 11:56 AM, Erlington Cardoza < >>>>>>>>>> erlingto...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> Yeah sorry for my lost, in that guide the config file has the >>>>>>>>>>> same configuration of my General file I showed you before. >>>>>>>>>>> /etc/smokeping/config.d/General: >>>>>>>>>>> >>>>>>>>>>> *** General *** >>>>>>>>>>> >>>>>>>>>>> owner = my owner >>>>>>>>>>> contact = ow...@mail.com >>>>>>>>>>> mailhost = mx.mail.com >>>>>>>>>>> # NOTE: do not put the Image Cache below cgi-bin >>>>>>>>>>> # since all files under cgi-bin will be executed ... this is not >>>>>>>>>>> # good for images. >>>>>>>>>>> cgiurl = http://my.domain/smokeping.cgi >>>>>>>>>>> # specify this to get syslog logging >>>>>>>>>>> syslogfacility = local0 >>>>>>>>>>> # each probe is now run in its own process >>>>>>>>>>> # disable this to revert to the old behaviour >>>>>>>>>>> # concurrentprobes = no >>>>>>>>>>> >>>>>>>>>>> @include /etc/smokeping/config.d/pathnames >>>>>>>>>>> >>>>>>>>>>> I guess it is an older version of smokeping. >>>>>>>>>>> Regards >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> 2014-03-11 18:47 GMT+01:00 Kwame Bahena <informa...@gmail.com>: >>>>>>>>>>> >>>>>>>>>>> So you are really lost. >>>>>>>>>>>> Follow a howto like this >>>>>>>>>>>> http://www.howtoforge.com/monitoring_network_latency_smokeping_debian_etch >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Tue, Mar 11, 2014 at 11:44 AM, Erlington Cardoza < >>>>>>>>>>>> erlingto...@gmail.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> I`m sorry in the guide I followed it just said type "sudo >>>>>>>>>>>>> apt-get install smokeping". I searched that config file with >>>>>>>>>>>>> "find" and I >>>>>>>>>>>>> found this one: /etc/smokeping/config, and it has this config: >>>>>>>>>>>>> >>>>>>>>>>>>> @include /etc/smokeping/config.d/General >>>>>>>>>>>>> @include /etc/smokeping/config.d/Alerts >>>>>>>>>>>>> @include /etc/smokeping/config.d/Database >>>>>>>>>>>>> @include /etc/smokeping/config.d/Presentation >>>>>>>>>>>>> @include /etc/smokeping/config.d/Probes >>>>>>>>>>>>> @include /etc/smokeping/config.d/Slaves >>>>>>>>>>>>> @include /etc/smokeping/config.d/Targets >>>>>>>>>>>>> >>>>>>>>>>>>> is that what you`re talking about? >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> 2014-03-11 18:34 GMT+01:00 Kwame Bahena <informa...@gmail.com> >>>>>>>>>>>>> : >>>>>>>>>>>>> >>>>>>>>>>>>> The smokeping config file. Do you know where is it? >>>>>>>>>>>>>> Did you follow a howto to install and configure it? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Kwame >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Tue, Mar 11, 2014 at 11:33 AM, Erlington Cardoza < >>>>>>>>>>>>>> erlingto...@gmail.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Which configuration do you need? smokeping conf or Debian?. >>>>>>>>>>>>>>> Which command I need to use? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2014-03-11 18:31 GMT+01:00 Kwame Bahena < >>>>>>>>>>>>>>> informa...@gmail.com>: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> You have an error on your config file. >>>>>>>>>>>>>>>> The error says that the file or directory /etc/config does >>>>>>>>>>>>>>>> not exist. >>>>>>>>>>>>>>>> Can you pastebin your config some place and share it? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> Kwame >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Tue, Mar 11, 2014 at 11:27 AM, Erlington Cardoza < >>>>>>>>>>>>>>>> erlingto...@gmail.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hey guys, first of all, thanks to oetiker for this >>>>>>>>>>>>>>>>> excellent tool. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Second, I have done the command ( smoke --debug ) and my >>>>>>>>>>>>>>>>> smokeping says "ERROR: loading smokeping configuration >>>>>>>>>>>>>>>>> file /usr/sbin/../etc/config: No such file or directory". >>>>>>>>>>>>>>>>> I am using Debian but I am not a master in this O.S by the >>>>>>>>>>>>>>>>> way. Also, my >>>>>>>>>>>>>>>>> local machine does graphics with data but my other host does >>>>>>>>>>>>>>>>> not appear the >>>>>>>>>>>>>>>>> data. In my desesperation I did assigned all of possible >>>>>>>>>>>>>>>>> permissions to the >>>>>>>>>>>>>>>>> other host, like this "-rwx-rwx-rwx 1 smokeping www-data" and >>>>>>>>>>>>>>>>> I still dont >>>>>>>>>>>>>>>>> have data in the new graphic, but in the local machine I do >>>>>>>>>>>>>>>>> have and Im not >>>>>>>>>>>>>>>>> using master-slave configuration. What can I do?. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Thanks and Regards >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>> smokeping-users mailing list >>>>>>>>>>>>>>>>> smokeping-users@lists.oetiker.ch >>>>>>>>>>>>>>>>> https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
_______________________________________________ smokeping-users mailing list smokeping-users@lists.oetiker.ch https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users