That should have said:
My guess: Either the config isn't being loaded because SP can't parse it. (i.e.
There's an error/syntax error in the config.)
-Greg
I don't know. It certainly appears as though smokeping isn't running, so that
would explain why you don't have any data.
My guess: Either the config isn't being loaded because SP can't open it, or
there's a rights issue opening it. [SELinux perhaps.]
The dig from here should be fairly straight-forward and will most likely just
mean you keep looking at the error messages and trying things until you get it
working.
[For example, a very simple config file, changing perms on the config file...]
-Greg
Just tried to get debug running on Smokeping and I’m getting back the following.
ERROR: loading smokeping configuration file /usr/sbin/../etc/config: No such
file or directory
I installed using apt-get should I can the install and re-install from scratch?
David Thompson
Network Services Support Technician
(O) 858.357.8794
(F) 858-225-1882
(E) dthomp...@esi-estech.com
(W) www.esi-estech.com
From: Gregory Sloop [mailto:gr...@sloop.net]
Sent: Monday, November 03, 2014 12:22 PM
To: David Thompson
Subject: Re: [smokeping-users] File paths not seeing what it is I'm doing wrong.
See:
https://github.com/oetiker/SmokePing/wiki/FAQ
In short, you either have a problem with the RRD files getting written, or your
web-server/cgi reading the RRD's.
You need to actually do some looking to figure out what's up. Running SP in
debug mode should help you determine if you can write to the RRD's. Apache logs
will get you some data about reading the RRD files.
There's just not much else to go wrong that I've ever seen.
Master/slave mode makes things a bit more complicated, since the slaves are
*writing* to the RRD's via the webserver - but the principles still apply.
-Greg
No that’s not it SELinux isn’t even installed on this box.
David Thompson
Network Services Support Technician
(O) 858.357.8794
(F) 858-225-1882
(E) dthomp...@esi-estech.com
(W) www.esi-estech.com
From: Sam Jones [mailto:jones...@isu.edu]
Sent: Friday, October 31, 2014 9:23 PM
To: David Thompson
Cc: smokeping-users@lists.oetiker.ch
Subject: Re: [smokeping-users] File paths not seeing what it is I'm doing wrong.
I had a similar issue with permission errors in the Apache logs and it turned
out to be SELinux.
Sam Jones
On Oct 31, 2014 8:52 AM, "David Thompson" <dthomp...@esi-estech.com> wrote:
Just installed a fresh instance of Smokeping and none of my images are loading
for some reason. The files are there when I download them to my desktop machine
I can open it up and view it. Here is a copy and paste from my pathnames file.
sendmail = /usr/sbin/sendmail
imgcache = /var/cache/smokeping/images
imgurl = ../smokeping/images
datadir = /var/lib/smokeping
piddir = /var/run/smokeping
smokemail = /etc/smokeping/smokemail
tmail = /etc/smokeping/tmail
I’ve tried editing imgurl to be the full path of /var/cache/smokeping/images
and restarted both Apache and Smokeping to no avail. I’m not out of disk space
either. Any ideas of what it is I’m doing wrong are appreciated.
David Thompson
Network Services Support Technician
(O) 858.357.8794
(F) 858-225-1882
(E) dthomp...@esi-estech.com
(W) www.esi-estech.com
_______________________________________________
smokeping-users mailing list
smokeping-users@lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
--
Gregory Sloop, Principal: Sloop Network & Computer Consulting
Voice: 503.251.0452 x82
EMail: gr...@sloop.net
http://www.sloop.net
---
_______________________________________________
smokeping-users mailing list
smokeping-users@lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
